139179
49
Zoom out
Zoom in
Vorherige Seite
1/58
Nächste Seite
Themen
49
Changing the default settings
˾
16:9: Select this option if you use a wide screen TV for replay. Please note
that fi lms, that have been recorded with TV-aspect 4:3 can still be replayed
using aspect 4:3. This means, that replaying this fi lm will not require the
complete wide screen area of the television.
View Mode
Here you can set various display options for the playback device that is con-
nected.
ޥ NOTE:
The setting „Panscan“ is not supported by all DVDs.
TV-System
Match the output of the DVD-Player to the colour transfer system of your replay
device. The following options are available:
˾
NTSC: A system primarily used in North America.
˾
PAL: A system commonly used in Europe.
˾
AUTO: Select this setting if your replay device is a multi-system unit.
Video Output
Select the video output option for the playback device that is connected and which
you wish to use. Choosing the right signal format depends on the type of connec-
tion and the playback device (see also the operating manual of the replay unit).
˾
S-VIDEO: Choose this option if your replay device supports progressive
signals and is connected to the DVD-Player by means of an S-Video cable.
˾
Component: Choose this option if your replay device supports progressive
signals and is connected to the DVD-Player by means of a Component-Video
cable.
˾
RGB: Select this option if your playback device is connected to the DVD
player via the SCART connection.
˾
P-Scan: Choose this option if your playback device supports progressive
signals and is connected to the DVD-Player by means of a Component-Video
cable.
ޥ NOTE:
˾
If you would like to select the „RGB“ setting, please ensure that your play-
back device supports this setting.
˾
If the „S-VIDEO“ or „P-Scan“ option is activated but your playback device
does not support Progressive Scan signals, no picture is displayed.
˾
By pressing the VIDEO button (Fig. 3/1) you can also switch between the
video output options. (Only in Stop Mode possible.)
05-DVD 797_GB.indd 4905-DVD 797_GB.indd 49 18.08.2008 15:58:26 Uhr18.08.2008 15:58:26 Uhr
49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

clatronic-dvd-797

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Clatronic dvd 797 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info