Bedienungsanleitung Clatronic es 2612 (Seite 42 von 66) (Deutsch, Englisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

362101

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

2. Swing the steam valve outwards and place a jug under the valve. After swit-

ching the equipment on and opening the steam control switch please turn the

knob counter clock wise. This opens the steam valve entirely.

3. Now, please press the pump button. Water is passed from the percolating head

to the steam nozzle. Allow the water to flow for at least one to two minutes

through the steam nozzle.

4. After ventilation via the steam valve please release the pump button and close

the steam control switch clock wise to close the steam valve completely.

We advise to ventilate the equipment via the steam valve and afterwards via the

brew head (this way you will be able to remove all air bubbles out the system) to

heat up the system.

Making Espresso

Please remember, Espresso has to be finer than regular percolator coffee.

1. Insert the plug into a 230 V /50 Hz socket, installed according to existing regula-

tions and with earth protection.

2. Please fill fresh cold water into the tank and switch on the ON/OFF switch. The

control lamp on the switch lights up.

3. Push the PUMP button. As soon as water runs out the brew head, release the

PUMP button, to stop the pump and wait until the readiness light comes on. The

water has reached the optimal temperature.

4. Insert the filter into the holder. Fill with 1 – 2 levelled spoons of coffee. Make

sure the coffee is spread evenly and press lightly with a measuring / pressing

spoon. Please remove carefully all obsolete coffee from the filter rim.

5. Insert the filter into the brew head and turn the handle towards LOCK (the filter

is properly locked in place, when the handle is positioned in the middle of the

machine). Place the espresso cup(s) under the brew head.

When the readiness lamp lights up press the pump button and espresso start

running into the cup(s). Your machine is working with approx. 15 bar pressure.

When the readiness lamp switches off, release the pump button to stop the pro-

cedure.

After brewing please wait several seconds, before removing the filter. Turn the

handle of the filter (from right to left) to release it. Attention: Pressure! To empty

the filter, please use the small special lever to hold the filter in place. Turn the fil-

ter upside down and tap out the used coffee grain. Please remove the filter after

each brewing process. This will prolong the live of the rubber gasket in the brew

head. To produce further espresso please refill the filter and wait until the rea-

diness lamp switches on again and proceed as described above.

Making Cappuccino

To froth milk please proceed as follows:

1. Press the steam button and wait until the steam and readiness lamp lights up.

5....-05-ES 2612 + P, CZ 02.09.2003 9:09 Uhr Seite 42

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic es 2612 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info