Bedienungsanleitung Clatronic fr 3091 (Seite 26 von 42) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

363720

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

ENGLISH

4. Please note that the safety switch (1) is operated when the

control element is inserted into the guide mechanism.

5. Choose the right frying temperature and check the conditi-

ons of the food to be fried. A rule of thumb is that pre-fried

foods require a higher temperature than raw foods.

6. Do not carry or move the deep fryer if the oil or grease is still

hot.

7. When frying dough-like foods scrape off the excess dough

and put the pieces carefully into the oil.

8. Please ensure that the handle of the deep fat frying basket

has been correctly attached.

• Press the ends of the wire together at the free end of the

handle.

• Insert the brackets into wire hoops inside the basket.

• The deep fat frying basket must not be more than 2/3

full. Do not overﬁ ll the frying basket (The maximum

ﬁ lling quantity for chips is 200g per litre of oil/fat).

9. Rub dry humid foods with a cloth before frying.

Caution: In the case of foodstuffs which are too moist (e.g.

frozen chips etc.) large amounts of foam may form, which

under certain circumstances may cause the oil to overﬂ ow.

Use

1. Make sure that the appliance is unplugged and switched off

(The control lamps are off.).

2. Take the lid off the deep fryer.

3. Remove the frying basket and ﬁ ll the container with oil or

grease (maximum 3.3 l). The ﬁ lling level must be located

between the minimum and the maximum level. Put the lid

back on.

4. Insert the plug into a 230 V, 50 Hz power socket. The green

control lamp (4) lights up. Set the desired temperature by

turning the temperature control (2).

5. The red control lamp (3) lights up. Once the set temperature

has been reached the red control lamp goes off. Place the

frying basket containing the items to be fried carefully into

the hot fat.

6. The red control lamp switches on and off several times

during frying. This is normal and it indicates that the

temperature is controlled by the thermostat and is being

maintained. Once the frying time is over (the frying times are

to be found on the packaging of the food or in the recipe),

please take out the frying basket.

7. Let the oil drip from the food being fried.

8. In order to switch off the machine, please turn the tem-

perature regulator to OFF and remove the plug from the

socket.Wind the mains lead up in the form of a spiral in the

cable compartment.

Cleaning

1. Make sure that the plug is pulled out.

2. Wait until the deep fryer is completely cool before cleaning.

Wait in any case for 1 to 2 hours after use before using

again to avoid burns.

3. In order to change the oil, pull the deep frying container out

by the handles andpour the oil out at the side.

4. Please do not immerse the device in water.

5. Clean the deep frying fat container, the lid and the

housing with a damp clothand household detergent if

necessary.Please do not immerse in water.

6. The deep frying basket can be cleaned in the usual way in

soapy water.

7. Avoid using abrasive materials or sharp objects. These may

damage the deep fryer!

Troubleshooting

Device is not working

Troubleshooting:

• Check the mains connection.

• Check the position of the thermostat.

Other possible causes:

The device is ﬁ tted with a safety switch (1).

This prevents the heater being switched on accidentally.

Troubleshooting:

Check that the control element is correctly in place.

Overheating Protection

• If you should accidentally switch on your deep fat fryer

when there is no oil or fat in it the overheating protection is

automatically turned on. The appliance is no longer ready

to be used. Unplug the deep fryer.

• Only after the device has been left to cool down completely

should the „RESTART“ button (9) on the rear of the control

element be operated in order to use the deep fat fryer again.

Please use a pointed object for this purpose.

Technical Data

Model: ..............................................................................FR 3091

Power supply:............................................................230 V, 50 Hz

Power consumption:..........................................................2000 W

Protection class:........................................................................... Ι

Filling quantity: .........................................................max. 3,3 Litre

This device has been tested according to all relevant current

CE guidelines, such as electromagnetic compatibility and low

voltage directives, and has been constructed in accordance with

the latest safety regulations.

Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a 24 month

guarantee starting on the date of purchase (receipt).

During the life of the guarantee any fault of the device or its

accessories ascribable to material or manufacturing defects will

be eliminated free of charge by repairing or, at our discretion, by

replacing it. The guarantee services do not entail an extension

of the life of the guarantee nor do they give rise to any right to a

new guarantee!

05-FR 3091 26 04.08.2006, 14:44:52 Uhr

Clatronic fr 3091 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info