Bedienungsanleitung Clatronic FW 3151 (Seite 29 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814176

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Arrangement of control elements

1 Filling tray 9 Knife

2 Motor 10 Plug

3 Switch ON/0/R (On/Off/

reverses)

11-13 Perforated discs

14 scroll

4 Safety switch „Forward/

reverse“

15 scroll housing

16 Pusher

5 Screw 17 Connection scroll

housing

6 Threaded hole

7 a + b Attachment

„Kebbe“

Without illustration

8 Sausage attachment 2-part cookie attachment

Intended use

This appliance serves

- Cut up foodstuff

- You can shape noodles or dough with different

attachments.

It is exclusively intended for this purpose and may be only

used appropriately.

It may only be used in the manner described in these

operating instructions.

You may not use the appliance for commercial purposes.

Use for any other purpose is considered improper and

not for the intended purpose and can result in damage to

property and personal injury.

Clatronic International GmbH is not liable for damages

caused by non-intended use.

Assembly of the meat grinder

Please also observe our illustrations under "A".

1. Insert the scroll housing into the mounting on the motor.

2. Lock the scroll housing into position with the screw.

3. Insert the scroll.

4. Insert the knife with the sharpened edge outwards onto

the shaft of the scroll.

5. Select a perforated disc.

NOTE

• Slightly grease the perforated discs beforehand with

vegetable fat.

• The guides on the perforated disc are located in the

recesses on the scroll housing.

6. Rotate the catch clockwise.

7. You can now attach the ﬁ lling tray with whatever you

want to grind.

See below "Electrical connection".

Mounting of the "Kebbe" attachment

NOTE

Tubes of meat or dough paste can be made with the

"Kebbe" attachment.

Please also observe our illustrations under "B".

First proceed as described in "Assembling the meat

grinder" Item 1 to Item 3.

1. Position the 2-piece Kebbe attachment on the shaft of

the scroll.

NOTE

The guides on attachment (A) are located in the recesses

on the scroll housing.

2. Rotate the catch clockwise.

3. You can now attach the ﬁ lling tray with your meat or

dough mixture.

See below "Electrical connection".

Assembly of the sausage attachment

Please also observe our illustrations under "C".

First proceed as described in "Assembling the meat

grinder" Item 1 to Item 5.

1. Position the sausage attachment on the scroll housing.

2. Rotate the catch clockwise.

3. You can now attach the ﬁ lling tray with whatever you

want to grind.

See below "Electrical connection/Application instructions".

Assembly of the cookie attachment

NOTE

You can shape different forms with this attachment after

preparing a cookie dough. This is particularly suitable for

so-called Spritzgebäck.

First proceed as described in "Assembling the meat

grinder" Item 1 to Item 3.

1. First, insert the disc onto the extension of the scroll

shaft.

NOTE

The guides are located in the recesses on the scroll

housing.

2. Then mount the shaping disc.

3. Rotate the catch clockwise.

4. You can now attach the ﬁ lling tray with your dough.

See below "Electrical connection/Application instructions".

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic FW 3151 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info