Bedienungsanleitung Clatronic FW 3803 (Seite 12 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814178

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

FW3803_IM 01.08.23

Assembly of the Cookie Attachment

You can shape different forms with this attachment after

preparing a cookie dough. This is especially suitable for

spritz biscuits.

• Please also refer to the illustrations under “D” (page 4).

• Please follow points 1 to 4 as described under “Prepa-

ration”.

5. First, insert the disco onto the extension of the scroll shaft.

6. Then mount the shaping disc.

7. Rotate the closure clockwise.

Continue reading under “Electrical connection” & “Operation”.

Electrical Connection

1. Check whether the mains voltage that you want to use,

corresponds with that of the appliance. You will nd the

information about it on the rating plate.

2. Ensure that the switch (3) is set to “OFF”. The function

selector switch (4) must be disengaged.

3. Only connect the appliance to a properly installed safety

socket.

Switch Functions

Function Switch ON / R (On / Reverse)

Use the function switch (4) to select the desired operating

mode for the switch (3).

Switch ON / OFF / R (Forward / OFF / Reverse)

The appliance is equipped with a forward and reverse func-

tion. Should the spiral ever become blocked, the reverse

function can be used to release the blockage.

- Forward

• The function selector switch (4) must be disengaged.

• Turn the switch (3) to “ON”. The appliance is in the

“forward” mode.

- Reverse

• Turn the switch (3) to “OFF” and wait until the motor

stops.

• Press the function selector switch (4) so that it is

engaged.

• Press “R” on the switch (3). The appliance will be in

the “reverse” mode as long as you keep the switch

pressed down.

- Switching Off

• Set the switch (3) to “OFF” and pull the mains plug out

of the socket.

Operation

WARNING: Risk of Injury!

Always use the supplied tamper. Never insert your ngers

or tools into the lling neck!

CAUTION:

Do not use the appliance for longer than 10 continuous

minutes. Let it cool for 10 minutes before using it again.

1. Put the pieces of meat (meat paste / sausage mass or

dough) on the lling tray and into the ller neck.

2. Stuff, if necessary, the meat respectively the dough with

the tamper.

Ending Operation

1. Pull the mains plug out of the socket.

2. Disassemble all parts of the meat grinder.

3. Clean the parts used as described under “Cleaning”.

Disassembly

1. Remove the lling tray.

2. Unscrew the closure in an anticlockwise direction.

3. Remove the accessories from the spiral housing. If

necessary, use a screwdriver to help.

4. Release the spiral housing by pressing the release

button and simultaneously turning the spiral housing

clockwise.

Cleaning

WARNING:

• Always unplug the mains plug from the socket before cleaning.

Wait until the appliance has cooled down.

• Never immerse the motor assembly in water for cleaning. It

could result in an electric shock or re.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic FW 3803 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info