Assembly
Remove the motor device and the accessories from the box. Also remove any
packaging materials that may be present.
High-Pressure Hose (7)
Use the high-pressure hose (7) to connect the high-pressure outlet (2) of the clea-
ner and the connection to the manual spray gun (8). Please use a size 17 spanner
to help you.
Jet pipe with nozzle, standpipe, manual spray gun
The jet pipe with nozzle can only be mounted on the standpipe and the standpipe
only on the manual spray gun. These components have quick-action connectors.
Align the coupling of the pipes with one of the connections. The connection is
locked by pressing and turning simultaneously in a clockwise direction.
The connection is opened by first pressing the components together and then tur-
ning the pipe in an anticlockwise direction.
Detergent Container
The detergent container can only be connected to the standpipe.
The detergent container consists of 2 components.
1. The quick-acting closure with nozzle. can be attached to or separated from the
standpipe by pressing and turning simultaneously.
2.
The container. After this has been filled it is screw on to the quick-acting closure.
Connection Requirements
Electrical connection
Only connect the machine to a properly installed safety socket, 230 V/50 Hz. Before
inserting the mains lead into the socket, check whether the voltage you intend to
use complies with that of the machine.
Extension Leads
Only extension leads that are protected against water spray should be used with
high mechanical strength and an internal diameter of at least 3 x 1.5 mm
2
.
Water Connection
The high-pressure cleaner is suitable for connection to a standard domestic water
supply. Please observe the regulations of your water supply company.
The supply hose (not supplied) should have the following dimensions:
Length: min 7,5 m Diameter: min. 1/2”
56
GB
