Bedienungsanleitung Clatronic hm 3316 (Seite 24 von 42) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

400993

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

ENGLISH

Turbo operation (3)

This is for switching to maximum speed for a short time. Press

at short intervals for pulsed mode operation.

CAUTION:

Do not use this function for more than one minute!

Initial Operation

Preparation

• Take out all the parts carefully out of the packing.

• Please be extremely careful when removing the foil from the

blade of the hand mixer!

• Clean the device before using it for the ﬁ rst time as de-

scribed in „Cleaning“.

Electrical connection

Check whether the electrical voltage that you intend to use is the

same as that of the machine. You can ﬁ nd this information on

the nameplate.

How to use the Kneader hooks/beater

1. Turn the power level selector switch (2) to „0“ and ensure that

the mixer has been disconnected from the mains.

2. Press the end of the kneader hooks/beater into the cor-

responding mixer openings until the hooks click into place.

While pressing, turn slightly in order to facilitate the whole

operation.

ޥ NOTE:

the kneading hook with the curved washer on the shaft

can only be inserted on the left-hand side of the mixer

when viewed from the bottom

3. Connect the device to a duly installed 230 V/50 Hz protec-

tive contact socket.

4. The handmixer can be used at various speeds set with the

speed regulator (2).

5. In order to release the kneading hook/whisk turn the power

level selector switch to „0“ and ensure that the mixer has

been disconnected from the mains.

6. Press the button (1) to release the kneading hook/whisk.

Remove the device by turning it slightly.

Using the Hand Blender

1. Pull the tab on the rear of the device upwards and insert the

hand blender. Please ensure when inserting the blender

that the arrows on the device and on the blender are in line

with one another. Tighten the hand blender in a clockwise

direction. The arrow on the hand blender must be pointing

upwards.

2. Connect the device to a duly installed 230 V/50 Hz protec-

tive contact socket.

3. Immerse the hand blender up to a maximum of ¾ deep into

a ﬁ lled mixing bowl.

4. The handmixer can be used at various speeds set with the

speed regulator (2).

5. When you would like to stop mixing, turn the power level

selector switch to „0“ and unplug the device from the mains.

6. In order to release the hand blender from the motor housing,

turn it in an anticlockwise direction and then pull it carefully

off.

Always choose a utensil and a speed according to the fol-

lowing table:

Product/Type of

Preparation

Max.

Quantity

Utensil Level

Max

Ope-

rating

Time

Heavy dough (e.g.

yeast dough)

500 g

kneader

hook

1 - 4 3 min.

Cake mixture

, light

crêpes mixtures

750 g beater 2 - 5

5 min.

(with turbo

1 min.)

Sponge mixture, wafer

mixture, Cream

750 g beater

2 - 5 or

turbo

5 min.

(with turbo

1 min.)

Salad dressings

Hand

blender

1 - 5

turbo

5 min.

(with turbo

1 min.)

Fruit

Hand

blender

1 - 5

5 min.

Onions, garlic

Hand

blender

turbo

1 min. in

pulsed

mode

Cleaning

WARNING:

• Always remove the plug before cleaning!

• Under no circumstances should you immerse the device

in water for cleaning purposes. Otherwise this might result

in an electric shock or ﬁ re.

CAUTION:

• Do not use a wire brush or any abrasive items.

• Do not use any acidic or abrasive detergents.

• Only a damp cloth should be used for cleaning the outside

of the machine.

• Clean the equipment in the usual way in soapy water.

Noise development

The workplace-related emission value is less than 70 dB(A).

Technical Data

Model: ..............................................................................HM 3316

Power supply: ............................................................230 V, 50 Hz

Power consumption: ............................................................250 W

Protection class: .......................................................................... ΙΙ

Short-term operation: ...........................................................5 Min.

Turbo operation: ...................................................................1 Min.

Net weight: ........................................................................1,40 kg

05-HM 3316.indd 2405-HM 3316.indd 24 01.04.2009 9:00:51 Uhr01.04.2009 9:00:51 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic hm 3316 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info