Bedienungsanleitung Clatronic HSM R 3265 (Seite 25 von 38) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

547291

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

Use

Short Operating Time

If you have used the device continuously for 5 minutes, please

let it cool down fur approximately 5 minutes.

Beard trimming and cutting

Move the switch (4) in the direction of the blade head:

Start with the longest cutting level and shorten the whole beard

or the beard on the chin or cheeks gradually to the desired

length.

CAUTION:

Lock the selected cutting length (cutting length comb) in

position with the locking switch located on the back of the

housing (3).

Hair cutting/thinning

Move the switch (4) in the direction of the blade head:

Start with the longest cutting level and shorten the hair gradually

to the desired length.

ޥ NOTE:

Lock the selected cutting length (cutting length comb) in

position with the locking switch located on the back of the

housing (3).

Contour cutting and neck shaving

• Remove the cutting length comb (7) and move the switch (4)

in the direction of the blade head.

• The shearing head enables the precise trimming of the

beard contours even areas, which are difﬁ cult to reach, and

the clean shaving of the hairline in the neck area.

Maintenance and care

• The regular cleaning and maintenance of the machine will

guarantee optimal results and long machine life.

• Use only a slightly humid and soft cloth to clean the machi-

ne.

• After using each time remove all the hair left on the machine

with cleaning brush.

• Remove the cutting length comb and the cutting head to

either blow away the hair particles or brush them away with

the cleaning brush.

• After using the machine each time apply 1-2 drops of acid-

free oil (sewing machine oil) on the cutting head.

CAUTION:

It is not allowed to recharge the battery continuesly more than

7.5 hours.

Noise development

The workplace-related emission value is less than 70 dB(A).

Technical Data

Model: ........................................................................HSM/R 3265

Power supply: ............................................... 220-240 V, 50-60 Hz

Mains adapter:..........................................................4.5 V/150 mA

Protection class: .........................................................................ΙΙΙ

Net weight: ........................................................................ 0.13 kg

This device has been tested according to all relevant current

CE guidelines, such as electromagnetic compatibility and low

voltage directives, and has been constructed in accordance with

the latest safety regulations.

Subject to technical changes without prior notice!

Removing the Batteries

The device contains rechargeable nickel metal hydride batteries.

Remove these batteries before you dispose of the device.

WARNING:

Disconnect the device from the mains before you remove the

battery!

• Use a small Philips screwdriver to release the screws from

the back of the device and under the blade head. The

housing can then be lifted off.

• Remove the battery.

• Use a pair of scissors to cut through the wires on the batte-

ry.

These can be returned to a collection point for old batteries or

special refuse. Contact your local authority for further informa-

tion.

Battery Disposal

As a consumer you are required by law to return used (rechar-

geable) batteries.

You can return your old (rechargeable) batteries free of charge

where they were bought, as well as at the local public collection

points in your town.

The following symbols are to be found on (rechargeable) batte-

ries containing harmful substances:

Pb = contains lead

Cd = contains cadmium

Hg = contains mercury

Li = contains lithium

Ni-MH = contains nickel metal hydride

HSM-R 3265.indd 25HSM-R 3265.indd 25 18.08.2008 15:24:27 Uhr18.08.2008 15:24:27 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic HSM R 3265 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info