Bedienungsanleitung Clatronic KB 3713 (Seite 30 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

686610

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

KB3713_IM 19.11.18

Unpacking the Appliance

1. Remove the appliance from the package.

2. Remove all packaging material such as lms, ller, cable

holders and cardboard.

3. Check the delivery contents for completeness.

4. Should the package contents be incomplete or damages

be found, do not take the appliance into operation. Take

it immediately back to the dealer.

NOTE:

Dust or production residues can be located on the appli-

ance. We recommend to clean the appliance as described

under “Cleaning”.

Scope of Delivery

1 Cooler box

1 Power cord for alternating current (AC) 220 – 240 Volt

1 Car power cord for direct current (DC) 12 Volt

Notes for Use

General Notes

• Never place the appliance next to naked ames or other

heat sources.

• For best results, only store already cooled food / bever-

ages in the cooler. Select a place of use that is protected

from direct sunlight.

• The lid is locked when the handle is pushed back and

when carrying.

• To open the cooler box, pull the handle forward.

• Do not open the lid more often than required. Do not

leave the lid open more often than it is necessary. This

affects the cooling performance.

• The cooling duration depends on the ambient temper-

ature.

• The appliance is not suitable for permanent operation.

• The appliance can be connected to two different energy

sources.

- Alternating current: 220 – 240 V~ or

- Direct current: 12 V

• Use the switch to select an operating mode.

NORMAL or ECO?

In order to operate the appliance in energy-efcient mode,

use the setting ECO.

NOTE:

• You may only use the appliance with the function ECO

when connecting it to alternating current 220 – 240 V.

• The output is reduced in the operating mode ECO.

Use this operating mode when there are smaller loads

in the cooler box, for example.

Using the Appliance

The switch for the operating mode, the AC connection

socket and the DC cable can be found at the backside of

the appliance.

Connection to the Alternating Current

1. Check to make sure that the mains voltage that you

want to use is 220 – 240 V~.

2. Plug the power cord for alternating current into the AC

socket on the appliance.

3. Connect the appliance to a properly installed earthed

socket.

4. Set the switch to NORMAL or ECO.

Connection to the Direct Current

1. Remove the power cord for the alternating current, if

necessary.

2. Turn on the engine of the motor vehicle.

3. Remove the DC cable from the cable storage compart-

ment at the backside of the appliance.

CAUTION:

The cable is rmly connected to the appliance. You

won’t be able to remove it.

4. Connect the appliance to the cigarette lighter in the

motor vehicle.

5. Set the switch to NORMAL.

NOTE:

Protect the battery of your motor vehicle. Only run the

appliance in the motor vehicle while the engine is running.

Terminating Operation

There is no automatic shut-off. The appliance runs perma-

nently as long as it is connected to a power source.

1. Unplug the power cord from the socket or the cigarette

lighter.

2. If you have operated the appliance with alternating cur-

rent, unplug the connection cable from the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic KB 3713 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info