380486

Clatronic km 2717 Seite 26

26
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
ENGLISH
ENGLISH
26
6. Position the cover of the mixer drive (19) on the base of the
machine so that the
▼
arrow is pointing to the circular
mark on the base. Then turn the mixer (3) or the mixer drive
cover (19) clockwise until the
▼
arrow is pointing to the
mark on the base of the machine.
Double Safety System: The motor can only be switched on
if the bowl is correctly locked in place with the lid and at the
same time the mixing vessel or the cover for the mixer drive (19)
is correctly mounted. Only remove the lid of the bowl and the
mixing vessel when the machine is switched off.
Mixer function
• The bowl must be fi xed in place as described under section
1 and 5 (without utensil).
• Chop the food to be mixed into small pieces.
• Fill the mixer vessel (3) with the food to be mixed (max.
1.5 l). Never fi ll with hot food or hard ingredients such as
potatoes, ice, coffee beans, nuts, and so on.
• Position the lid (4) with the pouring aperture facing to the
right and then lock this in place by turning it anticlockwise.
• Close the fi lling slot seal (5).
• Mount the mixing bowl (3) as described in paragraph 6.
• Extra ingredients (e.g. seasoning) can also be added
through fi lling slot in the mixer lid. Switch off the appliance.
Mixing bowl
• The lid of the mixing device (19) must be mounted as
described in paragraph 6.
• The mixing bowl must be mounted as described in para-
graph 1.
• Press the metal knife (15) or the plastic knife (16) down-
wards as far as possible without the utensil holder.
• When grating/cutting attachments are used, place the
desired utensil on to the utensil holder (14).
• Never use more than one utensil at a time.
• Position the lid of the bowl (8) as described under points 4
and 5.
• Use the fi ller (17) to press the food (max. 1.5 l) into the
fi lling slot. Exert a suffi cient degree of pressure on the fi ller.
The appliance must be switched on only with the fi ller (17)
mounted into place.
Putting into function
• Connect the appliance to a 230 V/50Hz socket.
• Interval switching (P): turn the appliance switch to the left
at brief and regular intervals several times. By doing so, the
result of the operation can be checked gradually.
Always choose a utensil and a speed according to the following
table:
Product/
Type of Preparation
Max.
Quantity
Utensil Level
Max.
Operating
Time
Heavy dough
(e.g. yeast dough)
500 g plastic knife I to II 3 min
Cake mixture 750 g plastic knife II to III 5 min
Sponge mixture or
wafer mixture
750 g plastic knife II to III 5 min
Cutting up, e.g. fruit,
vegetables, meat
500 g metal knife II to III 5 min
Cutting cucumbers,
carrots
500 g
cutting
attachment 12
II to III 5 min
Grating carrots, radish,
cheese
500 g fi ne grater II to III 5 min
Grating apples and
carrots
500 g coarse grater II to III 5 min
Grating potatoes,
hard cheese
500 g grating attachment II to III 5 min
Potatoes 500 g chip disk II to III 3 min
Liquids, shakes up to 1.5 l mixing vessel III or P 2 min
Note: The cutting and grinding attachments are located in the
accessory drawer (20) under the machine.
Cleaning
• Remove the plug from the socket before cleaning!
• Clean the bowl and the mixing vessel carefully immediately
after each procedure. To do so, remove the bowl in order to
be able to clean off any residues on the drive shaft.
• Never use sharp objects for cleaning!
• Never use abrasive detergents!
• Use a moist towel to clean the outside of the basis appliance.
• In the case of intensely colored foodstuffs (e.g. carrots), the
plastic parts can be stained: clean them with oil.
• Any removable parts which have come into contact with
food (utensil and bowls) can be cleaned in soapy water.
Noise development
The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 84.1 dB(A) (no limit)
Technical Data
Model: ..............................................................................KM 2717
Power supply:............................................................230 V, 50 Hz
Power consumption :...........................................................700 W
Protection class:.......................................................................... ΙΙ
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
05-KM 2717 N4 26 02.05.2006, 11:58:04 Uhr
… 26 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

clatronic-km-2717

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Clatronic km 2717 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info