19
ENGLISH
• Insert the plug in a duly installed 230V/50Hz socket.
• Switch the appliance on (I) or off (O) using the switch. If the
red LED is lit, the appliance is ready for operation. The heat-
ing phase has begun.
• Close the cover.
• After around 12 min, the green LED lights up. The heating
phase is complete. The rollers are hot and ready for use.
NOTE:
The temperature is controlled by a thermostat. The heat
switches back on automatically.
General Use
CAUTION:
Only use the rollers on dry hair.
• Select the roller size depending on the length and style of
hair you want to have. For tight curls use small rollers; for
wavy hair use large rollers.
• To secure the roller there is a metal clip matching the size of
the roller. The sizes are colour-coded.
• To retain the heat in the appliance, only open the cover
briey to remove the roller.
• Take a part of the hair, comb it and wind it around the roller.
The lock of hair should not be wider than the roller.
• Secure your hair to the roller using a clip.
• Repeat the process with the other rollers.
• Switch the appliance off if you no longer need it. Pull out the
mains plug.
• Leave the rollers in your hair, until they have fully cooled
(around half an hour).
• Then remove the clips and unwind the rollers again.
• Remove any hair that has stuck to the roller, so that it does
not burn when the roller is next heated.
• Finally style the hair with your ngers. Do not use brushes!
• Hold in place with spray or hair wax.
NOTE:
For better hold you can wash your hair before putting in the
rollers, apply mousse and blow dry.
CAUTION:
Do not apply styling products to the rollers!
Cleaning and Storage
WARNING:
► Before cleaning remove the mains lead from the socket.
► Wait until the appliance has fully cooled!
► Under no circumstances should you immerse the device in
water for cleaning purposes. Otherwise this might result in
an electric shock or re.
CAUTION:
► Do not use a wire brush or any abrasive items.
► Do not use any acidic or abrasive detergents.
• You can wipe the rollers with a lightly damped cloth.
• Clean the casing with a soft, dry cloth – without any ad-
ditional cleaning agents. If required you can lightly dampen
the cloth.
• Keep the inside of the appliance free of hair, dust or any
foreign objects.
• Make sure there are no metal clips on the base plate. Use
the accessory compartments to store the clips.
• Plug the rollers onto the rods. The different sizes of the
rollers have been marked on the base plate to help you. This
helps when putting away the rollers.
Model: ................................................................................LW 3371
Power supply: ............................................................. 230 V, 50 Hz
Power consumption: ..............................................................400 W
Protection class: .............................................................................I
Net weight: ...........................................................................1.75 kg
Subject to technical changes without prior notice!
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
