- Now, step on the scales.
- Wait until the measuring process is com-
pleted (the weight indication flashes 2 x).
-After a few seconds, the display will show
your determined weight, your body fat
percentage (symbol: ‘BF %’) followed by
your body water percentage (symbol:
‘BW %’). The scales furthermore
determines the muscle mass percentage
(‘BM %’), the calorie requirement for the
day (kcal), and the bone mass in kg/ lb.
(Bone / kg (lb.)
)
.
- During the ‘Body Fat (BF %)’ indication, a
bar is shown indication your status (LEAN
– thin, LESS – slightly underweight,
NORMAL – normal weight, MORE –
slightly overweight, FAT – overweight).
- The determined values will be shown in the
LCD display 2x in the mentioned order,
then the scales switch off automatically.
Display and Error Messages
General
If an error message (Err) appears in the dis-
play please wait until the scales switch off.
Then switch them on again to continue using
them. For a complete reset remove the battery
for a moment and then reconnect it.
Messages
• Switching on: All segments light up simul-
taneously. This is a check
that the displays are
working correctly.
•„0.0 kg/lb. The weight to be „:
measured is too low.
Correct operation is not
possible.
• „Err“: The calculated body fat/
water percentage ranges
beyond the upper or lower
measuring limit. The measure-
ment was aborted before
the measuring process was
ompleted or it was not
possible to per
•„0-LD“:The indication ‘0-LD’ means
form
measuring.
that the weight exceeds
150 kg. Do not exceed the
device’s maximum load to
prevent damages to the
device and the sensors.
- Place the scales on a flat
and solid surface.
• „ “: The battery charge is too
low.
Usage and care tips
• Weigh yourself without any clothes or
shoes on before meals and always at the
same hour of the day. The best time to
weigh yourself is when you wake up in the
morning.
• The balance rounds off weight to the
closest 100 g.
• If you weigh yourself twice and two diffe-
rent values are given, it means that your
weight is comprised between both values.
• Do not immerse the balance in water: the
electronic components can be damaged.
• Remove the batteries if the scales will not
be used for a longer period of time.
• Handle the balance with care, as it is a
precise measuring instrument. Do not drop
it or jump on it.
•Absolutely no need for maintenance.
• Do not load the appliance with more than
150 kg (330,7 lb.) to avoid damaging the
device.
Cleaning
• Clean the device with a slightly moist
cloth. Make sure that no humidity or
waters seeps into the device!
• Do not use abrasive detergents! These
can damage the casing of the device!
• Use a commercially sold detergent or soap
for cleaning.
• Dry the device well after cleaning with a
dry and soft cloth.
This device has been tested according to
all relevant current CE guidelines, such as
electromagnetic compatibility and low vol-
tage directives, and has been constructed
in accordance with the latest safety regula-
tions. Subject to technical changes without
prior notice!
57
GB
