483830
27
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
27
Charging the Unit
Turn the unit off.
Connect the power adaptor connector with one
of the following jacks.
The socket directly at the bottom end of the
unit.
Alternatively place the unit in the charging
station. The socket is at the rear.
Plug the power adaptor into a 230V/50Hz wall
outlet.
The charge indicator turns on during charging.
Note:
The charge indicator does not indicate the
state of charge of the rechargeable battery.
Charge the unit before rst use for 10 hours.
Later charges take 10 hours as well.
Note:
The unit cannot be operated with mains power.
Caution:
After 10 hours always disconnect from mains
power supply.
Note Lifetime Rechargeable Battery
You can extent the lifetime of the rechargeable
battery by following these steps:
Only charge after the battery is nearly
exhausted.
Do not charge for more than 10 hours.
Charge the unit at temperatures between
0° and + 40°C.
Clip and Cut Beard
Select the cutting length with the attachment
comb. Press and slide the button (3).
Slide the switch (4) towards the clipper head:
Start with the longest cutting stage and clip
goatee, sideburns or full beard step by step to
the desired length.
Clip Hair
Select the cutting length with the attachment
comb. Press and slide the button (3).
Slide the switch (4) towards the clipper head:
Start with the longest cutting stage and clip
your hair step by step to the desired length.
Outlining and Shaving the Neck
Remove the attachment comb (1) and slide the
switch (4) towards the clipper head.
The clipper head allows precise outlining the
shape of the beard, even in difcult to reach
places as well as a clean shaving of the hair-
line at the neck.
Finish Operation
Slide the switch (4) down.
Cleaning and Maintenance
Regular cleaning and maintenance ensures
optimum results and long lifetime.
Turn the unit off and disconnect from mains
power supply, if necessary.
Warning:
Do not submerge the unit in water.
Caution:
Do not use a wire brush or other abrasives.
Do not use sharp or abrasive cleaning
agents.
Use the cleaning brush to remove remaining
hair after use.
Remove the attachment comb (1).
Press the two buttons (2) at the rear of the unit
to fold out the clipper head.
Regularly apply 1 - 2 drops acid-free oil to the
clipper head.
Fold the clipper head back after cleaning until
it locks in place.
Clean the casing with a slightly damp cloth, if
necessary.
Replace the attachment comb.
Noise emission
The workplace-related emission value is less
than 70 dB(A).
Technical Specications
Model: .............................................HSM/R 3313
Power supply adaptor: ...............230V, 50Hz, 3 W
Output power adaptor: ...............DC 4.5V, 150mA
Protection class power adaptor: ........................ ΙI
Rechargeable battery: ...................1.2V, 800mAh
Run time: ...................................max. 35 minutes
Charging time battery: ........................... 10 hours
Net weight: .............................................0.140 kg
Subject to change without prior notice!
HSM-R 3313 final script.indd 27 2009-4-22 17:18:41
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Clatronic R 3313 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info