Operation
1. Assemble the appliance (disassembled) as follows:
• Place the mixing bowl on the motor housing. The “OPEN" arrow on the
mixing bowl is located above the arrow on the motor housing.
• Turn the mixing bowl in a clockwise direction until it locks in place.
• The "LOCK" arrow on the mixing bowl is located above the arrow on the
motor housing.
Warning! Safety switch! The mixer only works when the mixing bowl and the
large lid of the mixing bowl are in place.
2. Cut the food to be mixed into small pieces.
3. Now place the ingredients to be mixed in the mixing vessel and close the lid.
4. Ensure that the function switch is in the "0" position.
5. Insert the plug in a duly installed 230V/50Hz socket.
6. Switch the device on (1, 2) or use pulse operation (P).
7. In order to insert more food to be mixed the small lid may be removed. Please
switch off the machine before doing so.
8. In order to remove the mixer jug turn it counterclockwise.
Cleaning
• Fill half of the jug with water and press the push button for approximately 10
seconds. Then pour out the liquid.
• Remove the mains plug from the socket.
• In order to clean the mixer properly disassemble the appliance as follows:
Turn the mixing bowl in an anticlockwise direction and remove it from the motor
housing.
• Difficult-to-remove items in the mixing bowl can be removed with a rinsing
brush. Please take care with the sharp knives!
• Clean the individual parts in the usual way in soapy water.
• The housing of the motor device can be wiped off with a slightly moistened
cloth. Do not immerse the motor device in water!
• Leave the vessel to dry.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
24
GB
