Bedienungsanleitung Clatronic vcr d 620 (Seite 39 von 56) (Deutsch, Englisch)

138685

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

11 EN

7) Press MENU.

VCR Operation

VCR Features

Ensure that all VCR setting begins in VCR mode by pressing

VCR.

(Make sure that the VCR OUTPUT indicator is lit.)

Playback

Tracking Adjustment

• Tracking adjustment will be activated automatically

(Digital Tracking function) when you start playback.

• When playing pre-recorded tapes or tapes recorded on units

other than your own, noise lines (black and white streaks)

may appear on the playback picture. If this occurs, you can

adjust the tracking control manually by pressing

CH. (K/L) until the streaks disappear. To return to the

DTR function, stop the tape once and start playback again.

• You can reduce the noise lines by pressing

CH. (K/L) in

Slow mode, too. Slow tracking adjustment is not set

automatically.

• In the Still mode, press

SLOW, and press CH. (K/L) until

the streaks disappear. To return to the Still mode, press

PAUSE again.

1) Turn on the TV and select the video channel on the TV.

2) Insert a prerecorded tape.

The DVD/VCR will turn on automatically. If the erase-

protection tab has been removed, the DVD/VCR will

start playback automatically.

•If the DVD/VCR power was already on, press

VCR to

switch to VCR mode.

3) If playback does not start automatically, press

VCR, then

press

PLAY.

•Tracking adjustment will be activated automatically

(Digital Tracking function) when you start playback. To

adjust the tracking manually, press

CH. (K/L).

•Using the buttons on the DVD/VCR

Just press

PLAY on the DVD/VCR. Power will

automatically turn on and playback will start. (Direct

Button Operation)

•Using the buttons on the remote control

Press FUNCTION to turn on, and then press PLAY.

4) Press

STOP to stop playback.

Speed Search

1) Press D or h during playback to view a videotape at a

high speed in either a forward or reverse direction. In this

mode, the sound will be muted.

2) Press the button again, the DVD/VCR will now search in

super high speed. (This function will not operate for a

NTSC tape.)

3) Press

PLAY to return to normal playback.

Still Picture

Press PAUSE during playback to view a still picture on the TV

screen.

• When the picture begins to vibrate vertically, stabilize the

picture by pressing

CH. (K/L) in the Still mode.

• After the DVD/VCR has been in Still mode for 5 minutes,

it will stop automatically to protect the tape and the video

head.

• Usually there will be video “noise” lines (black and white

streaks or dots) on the screen. This is normal.

The still picture will, in addition to containing the “noise”

lines, be black and white.

This is not a fault of the machine but merely a by-product

of the technology involved in producing a DVD/VCR with

LP mode.

INITIAL

CH TUNING

CLOCK

RF OUT

LANGUAGE

CH TUNING

AUTO

MANUAL

MOVE

P01:

P02:

P03:

P04:

P05:

P06:

P07:

P08:

P09:

P10:

Position

Number

Channel

Number

[ ]

MOVE

P01:

P02:

P03:

P04:

P05:

P06:

P07:

P08:

P09:

P10:

[ ]

TIMER

SET UP

INITIAL

MOVE

P01:

P02:

P03:

P04:

P05:

P06:

P07:

P08:

P09:

P10:

H97A6ED(EN).fm Page 11 Wednesday, March 24, 2004 9:44 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic vcr d 620 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info