703397
23
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
23 EN
Operation
PLEASE NOTE!
Ensure that there are no larger and / or sharp objects on the surface which is to be
cleaned.
Note the MAX marking on the dust container. If during use the marking is reached,
empty the dust container. Empty and clean the dust container after each use. The
motor lters must also be regularly cleaned in order to prevent overloading of the
motor.
Switch the device off after each surface has been cleaned as this will considerably
increase the operating time on each battery charge. Charge up the battery after use
(see the “Charging Up the Battery” chapter).
1. Select an accessory as required (see the “Device Overview” and “Accessories”
chapters) and attach it to the device (see the “Assembly” chapter).
2. Press the On / Off switch (2) to switch on the device. The device will start vacuuming
immediately.
3. Move the nozzle over the surface to be cleaned.
4. After vacuuming, switch off the device by pressing the On / Off switch.
5. Empty and clean the dust container (7) (see the “Cleaning and Storage” chapter).
Cleaning and Storage
PLEASE NOTE!
Do not immerse the motor lter in water or rinse it under running water to prevent
damage to the motor lter. They cannot be washed by machine, put in the dishwasher
or tumble dried.
Accessories that are cleaned with water must be completely dry when they are in-
serted back into the device!
Do not use any sharp or abrasive cleaning agents to clean the housing. They could
damage the surfaces.
The motor lters may lose some of their colour over time. This is normal and
does not have any adverse effect on function.
Emptying the Dust Container
1. Remove the dust container (7) from the motor unit (3) (see the “Assembly” chapter –
“Removing / Inserting the Dust Container”).
2. Hold the dust container over a dustbin
3. Pull the catch of the bottom ap (19) away from the dust
container slightly. The bottom ap will open and the dirt
will fall out.
4. To close it, press the bottom ap onto the dust container.
The catch must be heard to engage in place.
5. Insert the dust container into the motor unit (see the
“Charging Up the Battery” chapter).
19
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cleanmaxx PC-P007E - Z09107 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info