Bedienungsanleitung Cleanmaxx Z 04997 - VSC28A (Seite 25 von 60) (Deutsch, Englisch, Holländisch, Französisch)

646295

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

4. Turn the knob for the steam quantity control (8) to the minimum

setting by turning it counterclockwise until it comes to a stop.

5. Park the appliance in an upright position. The hinge of the clean-

ing head locks in when in an upright position.

6. Insert the mains plug in a properly installed socket that is easily accessible. The power

LEDs (12) behind the water tank will illuminate in red as soon as operating voltage is present.

Wait until the appliance has reached the operating temperature and the power LEDs are blue.

7. Push the

steam On/Off switch (4) on the front of the main unit. (The steam activating switch

on the back (13) has been deactivated when the handle bar is inserted.) Steam will begin to

be emitted from the cleaning head. You can now increase the quantity of steam by turning

the knob for the steam quantity control. NOTE: After the knob is turned, it will take a few

seconds until the respective steam quantity is reached.

8. Hold the appliance by the handle and tip it slightly towards the ﬂ oor in order to release it

from the upright locking position.

9. Slowly slide the cleaning head back and forth over the ﬂ oor. The ﬂ oor will be cleaned in the

process.

10. When you have ﬁ nished cleaning the ﬂ oor, push the steam On/Off switch and pull the mains

plug out of the socket. Never pull on the cord, but always on the plug.

11. Wait a few minutes for the appliance to cool off before you remove the ﬂ oor pad. Be aware

that when turning off the appliance a wet area can form beneath the cleaning head.

12. Follow the instructions in the section “After use”.

Use as a handheld steam cleaner

1. Take the handle bar and cleaning head off of the main unit and mount the nozzle adapter with

the desired nozzle on it (see chapter “Assembling the appliance” and “Appliance functions

(Nozzle functions)”).

2. Fill the water tank (see chapter “Filling the water tank”).

3. Turn the knob for the steam quantity control (8) to the mini-

mum setting by turning it counterclockwise until it comes to a

stop.

4. Insert the mains plug in a properly installed socket that is easi-

ly accessible. The power LEDs (12) behind the water tank will

illuminate in red as soon as operating voltage is present. Wait

until the appliance has reached the operating temperature and

the power LEDs are blue.

5. Push the

steam On/Off switch (4) on the front of the main unit. In order to emit steam, Push

the steam acivating switch (13) on the back of the main unit. Release the steam activating

switch to stop emitting steam. You can now increase the quantity of steam by turning the

knob for the steam quantity control. Note: After the knob is turned, it will take a few se-

conds until the respective steam quantity is reached.

6. Slowly let the nozzle glide over the surface to be cleaned.

7. When you have ﬁ nished cleaning, push the steam On/Off switch and pull the mains plug out

of the socket. Never pull on the cord, but always on the plug.

8. Wait a few minutes for the appliance to cool off. Afterwards, you can change the nozzle.

9. Follow the instructions in the section “After use”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cleanmaxx Z 04997 - VSC28A Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info