646280
27
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
27
Cleaning the Device
CAUTION!
Empty the dust container if it is full and clean the lter regularly to prevent overhea-
ting of the motor.
Always remove the mains plug from the plug socket before doing any cleaning of
the device.
Keep the device, the cable and the mains plug away from water or other liquids in
order to avoid electric shocks. Make sure that no liquid gets into the device during
cleaning. Only the plastic dust lter and the exhaust air lter may be cleaned with
water. However, they must be completely dry before they are put back into the device.
Never clean the dust lter in the dust container lid using water or other liquids!
The lters are neither machine-washable, dishwasher-safe nor suitable for tumble
drying! Only ever dry the lters in the air, and never use a hair dryer to do so.
Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the
device. These could damage the surfaces.
Clean the dust lter, the plastic dust lter and the exhaust air lter regularly, or if you
notice a reduction in the suction power.
Clean the housing if necessary using a damp, soft cloth. Dry it with a soft cloth.
Remove hair and uff from the nozzles at regular intervals.
The lters may lose some of their colour over time. This is normal and does not
have any adverse effect on function.
Emptying and Cleaning the Dust Container
1. Detach the suction hose from the dust container (see „Assembly“ chapter, „Inser-
ting/Removing the Hose“ section).
2. Press the release button of the dust container and pull it
up out of the device by the handle.
3. Hold the dust container over an open dustbin. The distance
between the dust container and the dustbin should be as
short as possible to ensure that the dust from the dust
container falls into the dustbin only and does not spill into
the environment.
4. Press the button to open the dust container. The bottom
of the dust container will open and the dirt will fall out.
5. Close the bottom of the dust container again. The faste-
ner must be heard to engage in place.
6. If necessary, you can rinse the dust container and the plas-
tic dust lter with clear, lukewarm water. Turn the dust con-
tainer lid to remove it from the dust container. NOTE: On
the dust container and its lid there are arrows and closure
markings to make it easier for you to remove and attach
the lid. The lid can be removed when the marking on the
lid points to the opened lock symbol on the dust container.
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cleanmaxx Z 08864 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info