Bedienungsanleitung Cleanmaxx Z08004 (Seite 3 von 6) (Deutsch, Englisch, Holländisch, Französisch)

703912

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

EN Instructions

Customer Service / Importer:

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany • ✆ +49 38851 314650 *)

*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.

Product contents and product overview

1 Handle

2 Spray trigger

3 Upper pole

4 Lower pole

5 Cleaner tank (approx.

600 ml)

6 Spray head

7 Spray nozzle

8 Cleaning head with

cleaning cloth

Before ﬁ rst use

Any water residue in the cleaner tank is due to the fact that

the product was tested after assembly and is not a defect.

• Unpack all parts and remove all protective foils and stickers.

Check the product contents for any damages from transport.

Should you identify any transport damages, do not use the pro-

duct (!), instead please promptly consult the customer service.

• Assemble the mop by ﬁ rst inserting the upper pole (3) into the

bottom pole (4) until it audibly locks into place and then in-

sert the upper pole (3) into the pole receptacle on the cleaning

head (8) until it audibly locks into place. Your mop is now ready

for use!

Use

ATTENTION!

■ When cleaning laminate ﬂ oors, make sure that you do not

spray too much liquid cleaner on the ﬂ oor. Otherwise it could

cause it to swell up!

1. Open the cleaner tank (5) by screwing its lid off.

2. Fill the cleaner tank (5) with water or a cleaner of your choice.

3. Screw the lid back onto the cleaner tank (5).

4. Insert the cleaner tank (5) into the receptacle on the spray

head (6).

5. Afﬁ x the cleaning cloth to the cleaning head (8) with the hook-

and-loop fastener.

6. Now mop your ﬂ oors as usual by moving the cleaning head (8)

across the area you wish to clean and pressing the spray trig-

ger (2) as needed to dampen the ﬂ oor using the spray noz-

zle (7).

7. Fill the cleaner tank (5) if it is empty and, if necessary, wash the

cleaning cloth out with hot water in between.

Cleaning and storage

ATTENTION!

■ Do not use any scouring or abrasive cleaners or cleaning pads

for cleaning.

■ Only air dry the cleaning cloth; do not in any case machine dry

it or dry it with a hair dryer!

• Clean the mop with a damp cloth and mild cleaner as needed.

• You can wash the cleaning cloth in the washing machine. Do

not use any softener as it may reduce the suction power

of the cleaning cloth! Make sure you follow the instruc-

tions on the cleaning cloth’s washing label. Then let the

cleaning cloth air dry.

Disposal

The packaging material is recyclable. Dispose of the pack-

aging in an environmentally-friendly manner and make it

available to the collection service for recyclable materials.

Dispose of the product in an environmentally-friendly man-

ner, too. For more information, contact the administrative

body in your community.

Z 08004 M DS V1 0417

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cleanmaxx Z08004 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info