462047
146
Zoom out
Zoom in
Vorherige Seite
1/345
Nächste Seite
141
Select the Enable Compressor checkbox to activate the compressor. Using the compressor, you can change
the gain transfer characteristics of the signal path and control the dynamics of a signal. Compressor settings are
described below.
Group
Use the Group radio buttons to assign this compressor to a compressor group. The default is None. When you
assign a compressor to a compressor group—such as a group of two compressors configured for left and right
stereo channels—the compressors will monitor each other. When one channel compresses, all compressors in the
group compress together.
A compressor group must be configured for a single unit; a group cannot control compressors from multiple units.
Post Compressor Gain
Adjust the compressor gain with the slider or by using the Up/Down arrow buttons. The graph reflects the input/
output decibel levels with the gain, ratio, and threshold settings you select.
Threshold
Determines the RMS level at which the compressor begins to operate. The range is from -30 to +20dBu. The default
is 0dBu.
Ratio
Changes the rate of compression applied to the input signal as the signal exceeds the threshold level. The range is
1:1 to 1:20dB. The default is 1:1.
Attack
Sets the time increment used to reduce the signal from input level to the prescribed output level when the threshold
is exceeded. The range is 0 to 100ms in .5ms steps. The default is 10ms.
Release
Sets the time increment used to restore the signal to the input level when the signal drops below the threshold. The
range is 100ms to 2 seconds, in 5ms increments. The default is 500ms.
146

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ClearOne PRO 880T wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info