Bedienungsanleitung Clementoni Clempad Plus 4.4 (Seite 14 von 24) (Englisch, Holländisch, Spanisch)

653242

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

When should you use this kind of reset?

• When the Clempad keeps crashing and/or you can’t access the Clempad system.

• When Clempad starts up but the screen remains completely black.

• When Clempad starts up but freezes on the boot screen.

• When you have reset the Clempad system but the problems encountered when using the device persist.

How do you run this reset?

1. Make sure the tablet is switched o.

2. Press and hold down the VOLUME + key and then insert the power cable that should

already be plugged into a power supply socket.

FACTORY RESET

RESETTING WITH A KEY COMBINATION

Resetting the Clempad to its original factory settings means returning the device and its software to how they were

before the device was switched on for the rst time, and there are two ways of doing it: resetting with a key combination

(hardware) or resetting from Clempad Settings (software).

CAUTION: These operations will delete all your data! So before performing a reset, make a backup copy of all

your data (pictures, music, apps, etc.) as they will be deleted forever!

3. Wait for about 10 seconds until the Android

robot with a red triangle appears.

4. Release the VOLUME + key.

5. Press the physical Back button.

6. 7 options are available. To scroll the options from top down, use the

VOLUME + and VOLUME – keys. To conrm the option selected, press the

power button.

1. Reboot system now: select this to restart the system without making any

changes or to exit the current screenpage without resetting.

2. Apply update from external storage: this updates the operating system from

a micro SD card.

3. Update rkimage from external storage: this installs an operating system

from a micro SD card.

4. Apply update from cache: this applies an update directly from the cache (NOT RECOMMENDED).

5. Wipe data/factory reset: this resets the system completely to the original factory settings: it deletes all your data, settings,

proles, pictures and apps. (RECOMMENDED)

6. Wipe cache partition: : this resets the system partially to the original factory settings: it deletes all your settings, pictures,

registered proles (etc.), but keeps any apps you have installed (RECOMMENDED).

7. Recovery system from backup: this resets the system from a backup created previously – the success of this operation

cannot be guaranteed (NOT RECOMMENDED).

CAUTION! Apart from the Reboot system now option, all the others involve losing all or part of your data. So

before resetting the system, make a backup copy .

CAUTION: during this operation we suggest you leave the Clempad connected to the power cable. If the battery runs out

during the reset procedure, it will be impossible to reset the Clempad and start it up again!

clempad2014-ES NL UK GR.indd 14 06/08/2014 14:01:52

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clementoni Clempad Plus 4.4 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info