650965
34
Zoom out
Zoom in
Vorherige Seite
1/91
Nächste Seite
34
IMPORTANT:
If the power cable supplied is damaged, it must be replaced by the manufacturer, a service centre approved by
the brand or the retailer. In all events, it must be replaced by qualified personnel in order to avoid any risk of
injury.
I
F THESE CHECKS REVEAL NOTHING
,
THEN CONTACT YOUR RETAILER
S
A
FTER
-S
ALES
D
EPARTMENT
.
CAUTION!
Unplug the appliance before carrying out any maintenance or repair work.
12° PROBLEMS AND SOLUTIONS
You can solve many simple problems with your wine cellar yourself, thus avoiding having to contact your after-
sales department. Try the following suggestions.
PROBLEM
POSSIBLE CAUSES
The cellar will not start.
The cellar is not plugged in.
The on/off button is in the off position.
The fuse in your electrical installation has blown.
The cellar does not cool sufficiently. Check the temperature selected.
The external temperature is beyond the cellar’s operating
temperature.
The cellar is opened too often.
The door is not properly closed.
The door seal is not sealing correctly.
The compressor starts and stops frequently. The external temperature is high.
A large quantity of bottles has been put into the cellar.
The cellar is opened frequently.
The door is not properly closed.
The cellar has not been correctly set.
The door seal is not sealing correctly.
The light does not operate.
The cellar is not plugged in.
The fuse in your electrical installation has blown.
The LED is not working.
The light switch is off.
Vibration.
Check and ensure that the cellar is level.
The cellar makes a lot of noise.
A noise resembling circulating water is produced by the
coolant gas and this is normal.
At the end of a cooling cycle, you can hear the noise of water
circulating.
Expansion and contraction of the internal walls may cause a
cracking sound.
The cellar is not level.
The door does not close correctly.
The cellar is not level.
The door seal is dirty or damaged.
The shelves are not positioned correctly.
A part of the contents is preventing the door from closing.
Error code E1 or E2
Sensor problem, contact your retailer’s after sales department
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Climadiff CLI45 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info