Bedienungsanleitung Cloer 4950 (Seite 9 von 20) (Deutsch, Englisch, Holländisch, Französisch)

565538

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Overheating protection device

The electric kettle is equipped with a over-

heating protection. In the event that you ac-

cidentally operate the electric kettle without

water, the device will automatically switch

o for your safety and can have no function for

a short time. Let the appliance allow to cool for

ca. 1 hour. Afterwards ll in cold water and the

device will be ready to operate again.

Cleaning

CAUTION: Do not immerse appliance or base in

water and do not clean under running water!

Do not clean the electric kettle with heavily

abrasive cleaners. They could scratch the appli-

ance.

Clean very dirty appliances with a damp cloth

and lukewarm water.

Removing / cleaning the lime

filter

The lime filter is located below the pouring

spout inside of the kettle.

To remove, press the upper flat edge with

your thumbs to release the two brackets. Then

remove the filter towards the top.

Clean the lime filter with a little bit of soapy wa-

ter and place it into the bottom hole of the scale

filter holder of the water boiler with the bottom

pin first. Then push the two upper filter hooks

back into the square holes of the holder in the

water boiler until the scale filter latches.

Decalcifying

If you have hard water, the electric kettle should

be decalcied regularly (depending on the

hardness of the water, about every 2 - 3 weeks).

Use a commercially available liquid decalcifying

product (do not use chemical decalciers) and

follow the manufacturer’s instructions.

TIP: Mild calcium deposits can also be removed

with a mixture of 5 to 6 tablespoons of vinegar

in 0.5 l of water.

Please observe the following when decalci-

fying the machine:

First, pour cold water into the electric kettle.

Briey bring it to a boil.

Now, add the decalcier and let the device

stand for a while.

CAUTION: Do not bring this mixture to a boil.

After decalcifying, rinse the pot twice with clear

water.

Do not clean the electric kettle with heavily

abrasive cleaners. They could scratch the appli-

ance.

NOTE: Regularly decalcifying your electric kettle

will reduce the electricity used and prolong the

life of the appliance. The calcium content of

water varies from region to region. Please con-

sult your local water works or utility works for

information on water hardness.

In the event of malfunctions due to calcium

deposits, the guarantee will be voided!

Problem / Cause / Solution

Problem Possible

cause

Solution

Electric kettle

does not

function

Appliance

is not

plugged in

Plug the

power plug

into the

wall socket

Electric kettle

does not

function

Overheating

protection

switches o

appliance

Please see

page 9 under

“Overheating

protection

device“

Water bub-

bles over in

the electric

kettle

Too much

water has

been added

Add less

water, do not

exceed the

MAX marking

Electric kettle

does not

switch o

Added to

little watter

Add more

water / do

not come

below the

MIN marking

(= 0.8 l)

Electric kettle

makes loud

noises during

operation or

Too much

calcication

inside the

electric kettle

Decalcify

the electric

kettle

White spots

form at the

bottom of

the electric

kettle

Too much

calcication

inside the

electric kettle

Decalcify

the electric

kettle

Environmentally friendly disposal

We use only environmentally friendly packaging

for the transport of our appliances. Please recy-

cle cardboard/paper and plastic packaging ap-

propriately.

CAUTION!

Electrical appliances should

not be disposed of with

the household trash.

Electrical appliances contain valuable raw ma-

terials. When an appliance is worn-out, please

take it to a recognised recycling facility. Please

consult the local authorities for information on

recycling appliances.

Customer service

In the event that your Cloer appliance becomes

defective, please contact your Cloer dealer or

Cloer customer service department. Cloer elec-

trical appliances comply with current EC guide-

lines and safety regulations.

Conditions of warranty

Cloer grants you, the private end user, a

limited manufacturer’s warranty. Assuming

careful handling and compliance with the ope-

rating instructions and safety notices, we will

be obligated to replace the appliance at no

cost, insofar as there are defects in material or

workmanship. The repair will be eected by

repairing or replacing defective components.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cloer 4950 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info