Bedienungsanleitung Cloer 5609 (Seite 13 von 28) (Deutsch, Englisch, Holländisch, Französisch)

565514

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Close the water tank lid.

Open the pivot filter, insert a 1x4 paper filter and

add the required amount of coffee powder.

Close the pivot filter again.

Place the carafe on the warming plate. Make

sure that the carafe and its lid is properly placed

under the funnel of the filter basket to ensure that

coffee runs down from the filter into the carafe.

Press the ON/OFF button

During the brewing process, the drop symbol

flashes in the display.

The tank lighting switches off once all the coffee

has come through.

The drip-stop function allows you to remove the

carafe to pour yourself a cup of coffee before

the brewing cycle ends. In this case, you need

to make sure you put the carafe back in its place

in 30 seconds to prevent over-bubbling of water

or coffee.

After the brewing process, the filter coffee

maker keeps the coffee hot for 30 minutes, and

then switches off automatically. During this

time, the display flashes on the cup icon

and

the elapsed warm-keeping time is displayed

instead of the time.

If you want to switch off the unit manually,

please press 1x the ON/OFF button

CAUTION! Allow the unit to cool

down immediately before the

next use. Otherwise, the fresh

water you poured in may

overheat and release steam.

Risk of scalding!

Energy-saving and environment-friendly:

Flexible “keep warm“ time

A new regulation of EU Requirements (No.

801/2013) means that filter coffee makers with

“keep warm“ plate may protect the environment

by having only a “keep warm“ time of 30 minutes

beginning in 2015.

In parallel his saves your energy costs!

We want to lead by example, so we reduced the

“keep warm“ time to 30 minutes for your filter

coffee maker 5609 in 2013 already.

But we also know that sometimes this is not

enough!

So that you can remain flexible, your filter coffee

maker 5609 provides the option to change the

“keep warm“ time of coffee to 1 hour, 1 ½ hours

or 2 hours arbitrarily. The default setting of 30

minutes can be set back at all times.

Of course you can cancel every warming time

before the time passed by while pressing the

ON/OFF switch

The display shows the warming periods as follows:

00:30 (= ½ hour)

01:00 (= 1 hour)

01:30 (= 1 ½ hours)

02:00 (= 2 hours)

Note: To change the “keep warm“ time the

device must always be disconnected from the

outlet first and reconnected again.

To change the “keep warm“ time, please

proceed as follows:

Insert the power plug into the wall socket.

The time 00:00 is flashing.

Now please press AUTO, the arrow up button

and SET at the same time.

KANTEN

UND SCHARFE

BREC HEN

OBER FLÄCH ENGÜTE:

WINKEL:

QUALITÄT

PRODUKTION

GENEHMIGT

GEPRÜFT

BASE(Default)

GEWICHT:

BLATT 1 VON 1MAS SSTA B:1:1

ENTG RATEN

NAME

SIGNATUR

ZEICHNUNG NICHT SKALIEREN

WERKSTOFF:

BENENNUNG:

ÄNDERUNG

ZEICHNUNGSNR.

DATUM

WENN NICHT ANDERS DEFINIERT:

BEMASSUNGEN SIND IN MILLIMETER

OBER FLÄCH ENBESC HAFFEN HEIT:

TOLERANZEN:

LINEAR:

GEZEICHNET

AUTO

SET

Now the display shows the “keep warm“ time

00:30 (or, if ever changed, the current “keep

warm“ time), as well as the clock and the cup

symbol.

Use the arrow keys ( or ) to choose one

of the “keep warm“ times (00:30, 01:00, 01:30 or

02:00).

Then press SET to conrm the desired “keep

warm“ time.

After this, the display switches back to the time

00:00. Please continue as described in the in the

instruction booklet under “Setting the time“.

Note: The set “keep warm“ time is saved even if

the unit is disconnected from the power supply

and can be changed at any time by repeating

the above steps.

Setting an automatic start time

Your Cloer filter coffee maker is equipped with

an automatic start time function.

Note: It only works when the tank insert for

temperature stabilization (see page 3) is seated

in place.

This means you can set a time your coffee maker

should start making coffee in your absence (for

example, before you get up in the morning).

Press 1x SET to do so.

The timer symbol (= clock

) is displayed and

the hour of 0:00 flashes.

Use the arrow keys

to adjust the required

hour and press SET.

When the display switches to minutes, use the

arrow keys to adjust the minutes.

Press SET again. The automatic start time is now

set.

Fill in the required amount of water and coffee

powder.

Now press AUTO to activate the start time.

The timer symbol (= clock

) is displayed to

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cloer 5609 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info