Bedienungsanleitung Cobra BT200 (Seite 7 von 15) (Englisch)

538232

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Nothing Comes Close to a Cobra

Common BT 200 Functions

Home Button

Pressing this button enables you to return the handset to Standby mode from

any other mode.

Voice Dialing / Last Number Redial

This button serves two functions:

■

To enable voice dialing.

■

To redial the last number dialed from the handset.

Voice Dialing

You can activate your cell phone's voice dialing feature from Standby mode.

To Voice Dial A Number:

1. Press and release the Voice Dialing / Last Number Redial button.

2. Say the name or phone number command following the audio prompt.

The display screen will show the progress of dialing and connecting the call.

NOTE

Your cell phone must have voice dialing enabled and voice commands

recorded to use this feature with the BT 200.

To Redial The Last Number Dialed:

1. Press and hold the Voice Dialing / Last Number Redial button for two seconds.

The display screen will show the progress of dialing and connecting the call.

Function Buttons

The Function buttons provide different utilities to different modes of handset

operation. In any mode, the active functions are shown directly above the buttons

on the display screen as shown in this Standby display.

In this example, pressing the second button from the

left will display the Menu.

Operating Your Handset

English

Common BT 200 Functions

Push to Talk (PTT)

This button serves two functions:

■

To activate the handset microphone during a call when VOX is Off. This is similar

to the action of such a button on a Cobra VHF or a CB radio.

■

To activate the handset microphone for a PA announcement, the unit must be in

Standby and be connected to the stereo’s AUX input with the stereo in AUX mode.

To Activate the Handset Microphone During a Call:

1. After placing or accepting a call, press the PTT button and talk into the handset

microphone.

To Make a PA Announcement:

1. When the unit is in Standby mode, press the PTT button and talk into the

microphone.

NOTE

Before a PA announcement can be made:

■

The PA function must be turned ON from the settings menu.

■

The BT 200 must be connected to the stereo system AUX input.

■

The stereo must be in AUX mode with the stereo’s volume adjusted.

■

An optional installation cable is necessary to use the PA feature.

Green Phone Button

This button acts just like the green phone button on a cell phone. Pressing the

button answers an incoming call and initiates dialing an outbound call after the

number has been entered or selected.

In Standby mode, this button is a shortcut to the Call Log where a number can be

selected to call.

Red Phone Button

This button acts just like the red phone button on a cell phone. Pressing the button

ends an active call.

In modes other than an active call, it backs up to the Standby mode.

Operating Your Handset

VOL

LOG

CONT

PAIRED TO

XXX

Functions

Function Names

Function Buttons

BT200_MANL.qxp:10732 Cobra MR F300 BT 12/8/08 1:44 PM Page 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra BT200 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info