Bedienungsanleitung Cobra CDR 840 (Seite 12 von 14) (Englisch)

586735

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

English

18 19

Connecting to a Computer

Your Dash Cam

Adjusting Camera Settings

Your Dash Cam

Still Photo Mode Settings

•

Still Photo Mode Settings

Still Image Size This sets the level of detail in the photo. Higher M indicates more

megapixels, which will give you a sharper image, but take up more

memory. Options between 1M and 14M are available.

Still Quality Select between Super High Quality (SHQ) and High Quality (HQ)

Scene

Select between Auto, Sport, Portrait, Landscape, Snow, Beach, and Fire-

works.

Exposure

In very bright environments, use a positive EV. In dark environments

use negative EV. Options between -2 and +2 are available.

White Balance You can adjust the white balance based on the ambient lighting. Op-

tions include: Auto, Daylight, Cloudy, Fluorescent 1, Fluorescent 2, and

Fluorescent 3.

ISO Sensitivity Increasing ISO will make the camera more sensitive to light. Try

increasing ISO in low-light conditions, or leave it set to “Auto”

Color

Adjusts color saturation. Options include: natural, bright, and grey.

Effect

Photo effects include: Normal, retro, black and white, relief, negative,

drawing, painting, crayon.

While in Still Photo mode, press the MENU button to enter the menu selection

screen. Verify that Still Settings is selected, then press OK to conrm.

Press the UP and DOWN arrows to select the setting you’d like to modify, then

press the OK button to conrm.

A window on the right edge of the screen will display the available options.

Use the UP and DOWN arrows to make your selection, then press OK to

conrm.

To connect your camera to a Computer

•

Connect the camera to your computer using the

included USB to Mini-USB Cable.

By default, your device connects to your

computer in Mass Storage mode, and acts like

a ash drive. Videos can be viewed with any

standard video player that supports .avi les.

NOTE: Quicktime, the native video

player for Mac, only supports specic

types of .avi les and cannot playback

this camera’s videos. For links to

third party players that will work on

Mac, visit www.cobra.com/support/

software-downloads.

Movies that are locked begin with “SOS_” and

movies that are not locked begin with “MOV_”.

Note that if the Memory card gets too full,

videos that are not locked will be overwritten

to make room for new videos. If you want to

save any videos that begin with “MOV_” you

should copy them to your computer, or Lock

the les.

To switch the camera’s USB function

If you prefer to connect your camera to your PC as

a web or video camera, you can change this set-

ting in the settings menu.

Disconnect the camera from your PC, enter General

Settings, and change the USB Function to PCAM.

Then, when you reconnect your camera to your PC,

it will use this function.

If you want to review the

videos alongside the GPS

position on a map, then

you’ll need to download

Cobra’s Video player

from:

www.cobra.com/

dashcamsoftware

See the next page for

how to use this software.

NOTE: Start your web cam application before

connecting the camera.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra CDR 840 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info