Bedienungsanleitung Cobra CJIC 250 (Seite 21 von 38) (Englisch)

538255

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Nothing Comes Close to a Cobra

Getting Started

Standby And Receive

Standby mode is the usual mode for the radio whenever it is turned On.

From Standby Mode,You Can:

■

Change your radio’s settings using set-up routines.

■

Receive messages on the current channel as well

as DSC messages.

■

Receive NOAA alerts if Weather Alert mode is turned On.

■

Switch to Transmit mode using the Talk button.

While the radio is in Standby mode, the Receive mode is

entered whenever a strong enough signal to break squelch

is sent to the radio. You will hear the message through

whichever speakers are connected to the radio.

To Change The Channel You Are Listening To

You Can Choose One (1) Of The Following:

■

Press the Up/Down buttons. This will take you to

the next higher or lower VHF channel. For rapid

advance, press and hold the Up or Down button.

■

Press the Channel 16/9 button. This will take

you to Channel 16 with one (1) press and to Channel 9

with a second press. Additional presses will toggle

between Channels 16 and 9.

■

Press the Weather/UIC button. This will toggle the

radio between Standby mode and Weather Radio mode.

When in Weather Radio mode, the Up/Down buttons

will change the weather channel.

Standby Mode

Weather/UIC Button

Up/Down Buttons

Channel 16/9 Button

Operating Your Radio

English

Getting Started

Volume

The On-Off Power/Volume knob on the transceiver controls the speaker volume.

The volume adjustment applies only to what you hear from the speaker and does

not affect the volume of your outgoing messages. That is controlled by the circuitry

of your radio.

To Increase The Volume:

Turn the On-Off Power/Volume knob clockwise.

To Decrease The Volume:

Turn the On-Off Power/Volume knob counter-clockwise.

Squelch

Squelch control filters weak signals and radio frequency noise so that you can more

clearly hear the signals you want. You can think of it as a variable barrier that blocks

what you don’t want to hear.

To Squelch Your Radio:

1. With the Squelch knob turned fully counter-clockwise,

turn the On-Off/Volume knob clockwise until you hear

a hissing (noise) sound.

2. Turn the Squelch knob clockwise until the hissing

sound stops.

Turning the Squelch knob further clockwise (higher bearier)

will filter weak and medium strength signals until only

the strongest signal can get through at the highest

squelch setting.

To Receive Weaker Signals:

Turn the Squelch knob counterclockwise (lower bearier).

If the squelch is set so that you can hear a continuous

hissing sound, the scan and dual-watch functions will

be blocked.

Squelch Knob

Lower Bearier

Turn Until Hissing

Sound Stops

Turn Until Hissing

Sound Starts

n-Off Power/

olume Knob

Operating Your Radio

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra CJIC 250 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cobra CJIC 250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info