Bedienungsanleitung Cobra CJIC 250 (Seite 27 von 38) (Englisch)

538255

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

DSC Set-Up

To Enter Your MMSI Number:

1. Enter the Settings menu and scroll to

USER MMSI

with the Up/Down buttons.

2. Press the Call/Set button and the blinking cursor will

appear at the first digit under

USER MMSI ID ENTRY.

3. Use the Up/Down buttons to scroll through the number

list to that digit of your number.

4. Press the Call/Set button to select the digit and the

blinking cursor will move to the next digit of the number.

5. Repeat steps 3 and 4 until all nine (9) digits of your

MMSI number are entered.

NOTE

Press the High/Low Power button to backspace

and erase the last selected number.

6. Check that you have entered the number correctly.

7. Press and hold the Call/Set button to return to the

Settings menu.

If You Incorrectly Enter Your MMSI Number

You can repeat steps 1 through 7 to correct it. HOWEVER,

YOU CAN DO THIS ONLY ONCE! A third attempt to enter

an MMSI number will result in an error message as shown.

Pressing the Call/Set button from the error message

will return the radio to the Settings menu.

Once the error message appears, the radio will still

operate in all non-DSC modes. But you will have to

return the radio to Cobra Electronics (see product

service on page 69 for details) for reset before you

can enter your MMSI number and use the radio in

DSC mode.

Because the MMSI number is so important to DSC

operation, this limitation is imposed on all DSC capable

radios to prevent constant changes and the potential

introduction of errors in the process. If, for any reason,

it is necessary to change the MMSI number in the radio

more than once, you can return it to Cobra Electronics

for reset.

Operating Your Radio

User MMSI ID Entry

Error Message

Call/Set Button

ser MMSI

Nothing Comes Close to a Cobra

English

DSC Set-Up

•

Digital selective calling — DSC — employs digital RF signals which tend to carry

further and be less susceptible to distortion from noise and atmospheric conditions

than analog ones. The result is greater range and more reliable message delivery

per watt of output power.

But, that is not the only advantage of DSC equipped radios. Those radios are set up

to interface with GPS and to automate many of the operations involved in sending

and receiving messages. That results in more compact and accurate messages and

less congestion of the airwaves.

The price of these benefits to the user is the time it takes to do the required set-up

to make the DSC features work. A little time spent when your radio is new will pay

dividends over its life.

These procedures use the Settings menu. Refer to page 38 for information on

entering and exiting the Settings menu.

User MMSI Number

This nine (9) digit number is similar to a telephone number in that it is a unique

identifier for you and your vessel. DSC uses this number in every message it

sends and receives. That is why your radio will not operate in the DSC mode

until you enter your MMSI Number. You should enter it as soon as you receive

it from one (1) of the issuing agencies listed on page 9.

Operating Your Radio

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra CJIC 250 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cobra CJIC 250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info