Bedienungsanleitung Cobra MR F75 (Seite 32 von 40) (Englisch)

538286

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Nothing comes close to a Cobra

DSC Operation

Sending An All Ships Calls

A DSC All Ships call is used for the same urgency and safety purposes as the Pan

and Securite voice calls as well as to send routine messages to all stations at once.

It will reach all stations within range of your radio. If you have an urgent, but not

life-threatening, situation or a safety warning to broadcast to all vessels in your

area, this is the type of call to use. It should be used judiciously for routine calls.

To Send An All Ships Call:

In Standby mode, select a channel on which you want

to communicate for a routine call. (The radio will use

Channel 16 for urgent and safety calls.)

2. Press the Call/Set button to enter the Call Send menu.

3. Use the Up/Down buttons to scroll to ALLSHIPS.

4. Press the Call/Set button to move to the message

type menu.

5. Use the Up/Down buttons to select a message type

— URGENCY, SAFETY or ROUTINE.

6. Press the Call/Set button to send the message.

7. Depending on the type of message you chose,

the radio will automatically switch to a voice channel.

a. After urgency and safety calls, the radio will switch

to Channel 16 and wait for you to press the Talk button

to send the urgent or safety message by voice.

b. After a routine call, the radio will switch to the channel

you selected in step 1 and wait for you to press the

Talk button to send the routine message by voice.

DSC equipped radios that receive your message will be

automatically switched to Channel 16 or the channel you

selected to hear your voice message.

To return to

Standby mode without sending a message,

use the Up/Down buttons to scroll to EXIT and

press the Call/Set button.

All Ships

Standby Mode

Urgency/Safety/Routine

Operating Your Radio

Urgency Waiting

Routine Waiting

English

DSC Operation

Receiving Distress Calls

If your vessel is within range of a DSC Distress call, the radio will

receive the call, sound the distress alarm, and switch to Channel 16.

When A Distress Call Is Heard:

Press any button to turn Off the alarm and return

to Standby mode.

2. Read and write down the distress information on the

LCD (there may or may not be position data shown),

then determine whether you should answer the call.

3. Respond, if appropriate, by pressing and holding

the Talk button to transmit on Channel 16.

NOTE

Your radio will automatically switch to Channel 16

upon receiving a DSC distress call.

Regarding Distress Relay Calls

Your radio cannot send Distress Relay calls. Only large ships and

shore stations with specially equipped radios can send these calls.

Receiving Distress Relay Calls

Your radio will respond to a received Distress Relay call in the same way

as it will to a distress call.

Operating Your Radio

Distress Info on LCD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra MR F75 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info