Bedienungsanleitung Cobra MR HH400X VP (Seite 22 von 27) (Englisch)

538296

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Nothing comes close to a Cobra

Advanced Operation

English

Advanced Operation

Tri-Watch

Tri-Watch gives you one (1) button access to scan the three (3) locations of

most importance to you. Channel 16 will always be one (1) of the scanned

locations. The other two (2) locations will be stored in the radio. They can

be edited and/or recalled for future engagements of

Tri-Watch mode.

NOTE

The radio must be squelched for tri-watch to function.

See page 31 for squelch procedure.

To Program Or Edit The Tri-Watch Locations:

Press and hold the Tri-Watch button for three (3)

seconds. The Tri-Watch and Memory icons on

the LCD will be turned On.

2. Press the Channel Up or Channel Down button

to move to the channel you want to enter into

tri-watch location one (1).

3. Press the Tri-Watch button. You will hear a

two (2) beep confirmation signal.

4. Press the Channel Up or Channel Down button

to move to the channel you want to enter into

tri-watch location two (2).

5. Press the Tri-Watch button. You will hear a

two (2) beep confirmation signal and the Memory

icon will disappear from the LCD. The radio will

immediately engage tri-watch (see page 39

for further details).

To Enter Tri-Watch Mode:

From Standby mode, press the Tri-Watch button.

The

Tri-Watch icon will appear on the LCD and the radio

will scan among Channel 16, tri-watch location one (1),

and tri-watch location two (2). A signal on any one (1)

of the three (3) locations will stop the scan for ten (10)

seconds to allow you to listen to the traffic on that location.

To Exit Tri-Watch Mode:

Press the Tri-Watch button.

The icon will disappear from the LCD and the

radio will return to

Standby mode status.

During Tri-Watch (while receiving an incoming

transmission), You Can Choose From The Following:

Press the Talk button to remain on that

tri-watch location and return to Standby mode.

b. Press the Channel Up or Channel Down button

to resume scanning tri-watch locations.

If you do not press any buttons within ten (10)

seconds, your radio will automatically resume

scanning tri-watch locations.

During Tri-Watch (while not receiving a transmission),

You Can Choose From The Following:

Press the Talk button to communicate on the

last tri-watch location scanned and return to

Standby mode.

b. Press the Channel Up or Channel Down button

to change scan direction.

Intro Operation Customer

Assistance

Warranty

Notice

econdary Icons

Caution Warning

Installation

Customer

Assistance

Operating Your Radio

Intro Operation Customer

Assistance

Warranty

Notice

econdary Icons

Caution Warning

Installation

Customer

Assistance

Operating Your Radio

Channel Up/Down Buttons

Intro Operation Customer

Assistance

Warranty

otice

condary Icons

aution Warning

Installation

Customer

Assistance

ri-Watch Button

Tri-Watch and Memory Icons

Talk or Channel Up/Down

ri-Watch Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra MR HH400X VP Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info