Bedienungsanleitung Cobra MR HH450 DUAL (Seite 27 von 44) (Englisch)

538275

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Operating Your Radio

Nothing Comes Close to a Cobra

Advanced Operation

English

Advanced Operation

Operating Your Radio

Scan Modes

A signal on any channel will stop the scan for 10 seconds to

allow you to listen to the traffic on that location. After 10

seconds, the radio will resume scanning.

Press the Channel Up/Down button to resume scanning

before the 10-second pause has completed or to change the

scan direction.

VHF Channel Scan

During Channel Scan mode, the radio will rapidly switch

from channel to channel through all the channels.

NOTE

The radio must be squelched for Channel Scan mode

to function. See page 28 for Squelch procedure.

To Enter Marine Scan:

1. From Marine or GMRS Standby mode, press the

SCAN button. The radio will immediately begin to

scan the entire channel map selected in the active

channel map.

CHANNEL SCAN will display on the matrix.

NOTE

If Priority 16 feature has been selected, channel 16

will checked frequently for activity to insure you will

not miss any calls.

2. To EXIT Channel Scan mode, press the SCAN or PTT

button again. The SCAN icon will disappear from the

LCD and the radio will return to Marine or GMRS

Standby mode.

SCAN Button

MEMSAMEATIS VOX

LO MEDHI

VHF

GMRS

CIU

Scan Display

Channel Up/Down Buttons

To Enter Memory Location Scan:

1. From Marine or GMRS Standby mode, press the

MEM/ESC button.

2. Press the SCAN button. The radio will immediately

begin to scan all pre-assigned memory channels.

The MEM icon will show on the LCD, and MEM

CHAN SCAN will display on the matrix along with the

memory location.

3. To EXIT Memory Location Scan mode, press the

SCAN or PTT button again. The MEM icon will

disappear from the LCD and the radio will return to

Marine or GMRS Standby mode.

GMRS Scan

In GMRS mode, there are 3 types of scans - all GMRS

channels, CTCSS tones (on the selected channel) and DCS

codes (on the selected channel).

To Enter the GMRS Scans:

1. Successive press and release of the SCAN button

will toggle betwen all channel scan, CTCSS tone scan

and DCS code scan.

2. Press and hold the SCAN button to start the

selected scan.

3. To exit a GMRS scan, press the MEM/ESC button or

PTT.

MEM/ESC Button

MEMSAMEVOX

LOMEDHI

VHF

GMRS

CIU

Memory Channel Scan

Memory Location Scan

During Memory Location Scan mode, the radio will rapidly

scan through all pre-assigned memory channels.

NOTE

The radio must be squelched for Memory Location

Scan mode to function. See page 18 for Squelch

procedure.

NOTE

If there are fewer than two (2) memory locations

programmed in the radio, the Memory Location Scan

option will not be available. To program at least two

(2) memory locations, see page 34.

MEMSAMEATIS VOX

LO MEDHI

VHF

GMRS

CIU

Scan All Schannels

MEMSAMEATIS VOX

LO MEDHI

VHF

GMRS

CIU

Scan CTCSS

MEMSAMEATIS VOX

LO MEDHI

VHF

GMRS

CIU

Scan DCS

MRHH450DUAL_MANL_ENG_MRHH330_ENG_Body 1/24/14 11:28 AM Page 48

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra MR HH450 DUAL Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info