Bedienungsanleitung Cobra MR HH90 VP (Seite 6 von 23) (Englisch)

538299

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Nothing comes close to a Cobra

English

VHF Marine Radio

Procedures Voice Calling

VHF Marine Radio Procedures

•

Maintain Your Watch

Whenever your boat is underway, the radio must be turned on and

be tuned to Channel 16 except when being used for messages.

Power

Try one half watt first if the station being called is within a few miles. If there is

no answer, switch to a higher power. This will conserve your battery and

minimize interference to other users.

Calling Coast Stations

Call a coast station on its assigned channel. You may use Channel 16

when you do not know the assigned channel.

Calling Other Vessels

Call other vessels on Channel 16 or on Channel 9. (Channel 9 is preferred

for recreational vessel use.) You may also call on ship-to-ship channels

when you know that the vessel is listening on a ship-to-ship channel.

Limits on Calling

You must not call the same station for more than 30 seconds at a time.

If you do not get a reply, wait at least two minutes before calling again.

After three calling periods, wait at least 15 minutes before calling again.

Change Channels

After contacting another station on a calling channel, change immediately

to a channel which is available for the type of message you want to send.

Station Identification

Identify, in English, your station by your FCC call sign, ship name, the state registration

number, or other official number at both the beginning and end of each message.

Prohibited Communications

You MUST NOT transmit:

■

False distress or emergency messages.

■

Messages containing obscene, indecent or profane words or meaning.

■

General calls, signals, or messages (messages not addressed to a particular

station) on Channel 16, except in an emergency or if you are testing your radio.

■

When you are on land.

Voice Calling

•

To call another vessel or a shore installation such as a lock or bridge tender:

■

Make sure your radio is on.

■

Select Channel 16 and listen to make sure it is not being used.

NOTE

Channel 9 may be used by recreational vessels for general-purpose

calling. This frequency should be used whenever possible to relieve

congestion on Channel 16.

■

When the channel is quiet, press the Talk button and call the ship you wish to

call. (Hold the microphone a few inches from your face and speak directly into it

in a normal tone of voice — clearly and distinctly.) Say “[name of station being

called] THIS IS [your vessel’s name or call sign].”

■

Once contact is made on the calling channel, you must switch to a proper

working channel. See the channel listing on page 12 – 13.

The vessel Corsair calling the vessel Vagabond:

Corsair:

“Vagabond, this is Corsair.”

Vagabond: “Corsair, this is Vagabond. Reply 72 (or any proper working channel).”

Corsair: “72.” or “Roger.”

■

After communications are completed, each vessel must sign off with its

call sign or vessel name and switch to Channel 16.

NOTE

For best sound quality at the station you are calling, hold the radio

at least two inches (5 cm) from your mouth and slightly off to one side.

Speak in a normal tone of voice.

VHF Marine Radio Protocols VHF Marine Radio Protocols

For Example

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra MR HH90 VP Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info