Bedienungsanleitung Cobra MX514SPB (Seite 5 von 19) (Englisch)

634406

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

- 5 -

16. Do not start the engine when standing in front of the discharge chute.

17. Never put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

18. Always ensure the engine is fully switched off before picking up/carrying the Lawnmower.

19. Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a

complete stop and, where a key is fitted remove the key, make sure engine has had time to cool.

- Before unclogging chute and clearing blockages.

- Before checking, cleaning or working on the lawn mower.

- After striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting.

- If the lawn mower starts to vibrate abnormally (check immediately).

20. Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a

complete stop and, where a key is fitted remove the key, make sure engine is completely cooled.

- Whenever you leave the lawn mower.

- Before refuelling.

21. Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve,

turn the fuel valve off at the conclusion of mowing.

Maintenance and Storage

1. Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

2. Never store the equipment with petrol in the tank inside a building where fuel vapours can reach an

open flame or spark or where the temperature is high.

3. Before storage allow the engine to cool.

4. To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage area

free of grass, leaves, or excessive grease.

5. Check the grass catcher and deflector frequently for wear or deterioration.

6. Replace worn or damaged parts for safety. Genuine parts should always be used as parts of

inferior quality can damage the equipment and compromise safety.

7. If the fuel tank has to be drained, this should be done outdoors. Always ensure engine is completely

cooled before starting this task.

8. If the blade needs to be removed, wear strong gloves to prevent injury to hands and fingers. Check the

blades balance after sharpening.

9. When transporting the machine make sure you close the fuel cut off. Be careful to ensure weight is

evenly distributed. Wear strong gloves.

10. When tilting the machine never tilt towards the air filter as this may become damaged with fuel.

11. Never crank the engine when the spark plug is removed.

12. Frequently check the fuel lines and fittings for damage and cracks, replace if necessary

13. Never start the engine with the air filter cover removed.

14. Carefully clean the mower and grass bag after use to remove debris as this can damage and corrode.

Fertilisers and top dressings are particularly corrosive.

15. In time your chassis may peel because of the abrasive action of the debris making contact. This can

be remedied by touching up paintwork where necessary to prevent corrosion.

Warning: Do not touch rotating blade.

Warning: Refuel in a well ventilated area with the engine stopped.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra MX514SPB Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info