Bedienungsanleitung Cobra MX515SPBI - DYM1588SD (Seite 12 von 19) (Englisch)

634408

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

- 12 -

Start the engine carefully according to instructions and with feet well away from the blade.

Do not tilt the lawn mower when starting the engine. Start the mower on a level surface, free of high grass or obstacles.

Keep hands and feet away from the rotating parts. Do not start the engine when standing in front of the discharge opening.

7.3 OPERATION PROCEDURES

During operation, tightly hold the brake handle with both hands.

Note: During operation, when the brake handle is released, the engine will stop and thus stopping the lawnmower from operating.

Warning!

In order to avoid any unintentional start-ups of the lawn mower, it comes equipped with an engine brake which must be

pulled back before the engine can be started. When the engine control lever is released it must return to its initial position, at

which point the engine automatically switches off.

Note: Engine brake (brake handle): Use the lever to stop the engine. When you release the lever the engine and the blade stop

automatically. To mow, hold the lever in the working position. Before you start to mow, check the start/stop lever several times to

be sure that it is working properly. Ensure that the tension cable can be smoothly operated (i.e. is not catching or kinking in any

way)

7.4 TO STOP ENGINE

CAUTION: The blade continues to rotate for a few seconds after the engine is shut off.

1. Release the brake control handle to stop the engine and blade.

2. Disconnect and ground the spark plug wire as instructed in the separate engine manual to prevent accidental starting while

equipment is unattended.

7.5 POWER DRIVE - SELF PROPELLING

Grip the self-drive control handle, the lawnmower will move forward automatically (Fig.10A), release the self-drive handle, the

lawnmower will stop moving.

The mower is equipped with a speed adjusting system which can adjust 5 speeds (3.0km/h-4.5 km/h 0.3).

Position 1: the slowest position; Position 5: the fastest position.

Follow the steps below to change the speed:

1. Release the self-drive control handle until the lawn mower stops.

2. Adjust the appropriate speed which you want. (Fig.10B)

3. Grasp the Self-drive control handle to continue mowing. (Fig.10A)

Fig.10A Fig.10B

CAUTION: your mower is designed to cut normal residential grass of a height no more than 250mm.

Do not attempt to mow through unusually tall dry or wet grass (e.g., pasture) or piles of dry leaves. Debris may build up on the

mower deck or contact the engine exhaust presenting a potential fire hazard.

7.6 FOR THE BEST RESULTS WHEN MOWING

Clear lawn of debris. Be sure that the lawn is clear of stones, sticks, wire or other foreign objects, which could be accidentally

thrown out by the mower in any direction and cause serious personal injury to the operator and others as well as damage to

property and surrounding objects. Do not cut wet grass. For effective mowing do not cut wet grass because it tends to stick to the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra MX515SPBI - DYM1588SD Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info