Bedienungsanleitung Cobra S120R (Seite 1 von 2) (Englisch)

586768

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Typical Fitting

10mm

Minimum

Typical Fitting

When you have found a suitable location, using

the ’L’ shaped mounting bracket as a template,

drill between 2 and 4 pilot holes into the selected

mounting surface for attaching the bracket using

either the self-tapping screws or the nuts and bolts

provided.

You will need to attach the bracket using at least

2 screws or 2 nuts and bolts to ensure that the

bracket is well secured. Remember that there is a

lot of vibration within the engine compartment

so it is very important that the S120R mounting

bracket is secured correctly.

User Guide

Thank you for purchasing the Cobra iRadar S120R

for iPhone, the world’s rst connected radar/laser

detector.

iRadar S120R uses Bluetooth® wireless

technology to connect your iPhone®/iPod Touch®

to display radar, laser and speed camera alerts.

Follow these simple steps to get your

iRadar S120R up and running.

Cobra iRadar is made for

iPod touch (5th Generation)

iPod touch (4th Generation)

iPhone 5

iPhone 4S

iPhone 4

NOTE: Location-based alerts and GPS settings

available only with iPhone. Only radar/laser alerts

and settings will work with iPod touch.

What’s in the box?

Cobra iRadar S120R

Mounting bracket

Screw, nut & bolt pack

Cable-tie fasteners

Typical Fitting

10mm

Minimum

Typical Fitting

For iPhone

S120R

Typical Fitting

Mounting Notes

When mounting and connecting the power cables

of the S120R ensure that you mount the unit and

cables away from any moving parts such as air-

cooling fans or the fan belt. Position the unit so

that device and power cables do not interfere with

any moving parts within the engine compartment

or interfer with any part of the vehicle that could

endanger you or your passengers. Please check

that all surfaces are safe to drill through before

beginning any work.

Setting Up iRadar S120R

The S120R has been designed to be mounted

under the hood, behind the vehicle’s grille or

within an air intake at the front of the vehicle if

appropriate using the ’L’ shaped bracket and screw

pack provided.

Find a suitable mounting position for the detector,

ensuring that the front of the unit has a clear

view of the road ahead and is unobstructed by

any metallic objects and that there is a sucient

mounting area to attach the ’L’ shaped xing

bracket. The S120R needs to be mounted in as

horizontal a position as possible so that it is looking

directly down the road ahead.

We recommend that you mount the detector either

behind the vehicle’s grille (if the openings of the

grille are at least 10mm in diameter) or within an air

intake at the front of the vehicle. The S120R can be

mounted anywhere at the front of the vehicle, but

for optimum performance we suggest you mount

it as close as possible to the license plate of the

vehicle.

Connecting the iRadar S120R

The S120R is powered by wiring it directly to your

vehicles 12V electrical system using the cable

supplied. Connect the red (positive) wire to a

switched 12V ignition supply, this will power on the

detector when the ignition is switched On, and O

when the ignition is O.

Connect the black (negative) wire to a chassis

ground or battery ground. In many cases, this

wire can be attached to any metal portion of the

vehicle frame. The LED will blink red if the power

connection has been completed successfully. This

LED can be located near to the point where the

power cable enters the rear of the device.

It is not advisable to connect the S120R directly

to the vehicle battery as after long periods

of vehicle inactivity the vehicle battery may

become discharged.

Trademark Acknowledgement

Cobra

and the snake design are registered trademarks of Cobra Electronics

Corporation, USA.

iPhone

and iPod

touch are trademarks of Apple, Inc, registered with the U.S. and other countries.

The Bluetooth

word mark is a registered trademark owned by Bluetooth SIG, Inc. and any use of such marks by Cobra

Electronics Corporation is under license. Other trademarks and trade names are those of their respective owners.

NOTE: This device complies with part 15 of FCC rules: Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) This device must accept any interference received

including interference that may cause undesired operation.

CAUTION: Modiﬁcations or parts not approved by Cobra Electronics

Corporation may violate FCC Rules and void authority to operate this

equipment.

S120_QSG_US.indd 1 6/4/13 9:37 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra S120R Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info