Bedienungsanleitung Cobra S32E (Seite 6 von 24) (Englisch)

634453

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

VIBRATION

The Eur

opean Physical Agents (Vibration) Directive has been brought in to help reduce

hand

arm vibration syndrome injuries to power tool users. The directive requires power tool

manufacturers and suppliers to provide indicative vibration test results to enable users to make

informed decisions as to the period of time a power tool can be used safely on a daily basis and the

choice of tool. Further Advice can be found at www.hse.gov.uk

Vibration total values (triax vector sum) determined according to EN60335-2-92 and EN13683

Vibration level for operation

Vibration emission value ah = 3.591m/s²

Uncertainty K = 1.5 m/s²

The declared vibration emission value should be used as a minimum level and should be used with

he current guidance on vibration.

Calculating the actual period of the actual period off use can be difficult and the HSE website

has further information.

The declared vibration emission been measured in accordance with a standard listed test stated

above and may be used to compare one tool with another. The declared vibration emission value

may also be used in a preliminary assessment of exposure.

WARNING! The vibration emission value during actual use

of the power tool can

differ from the declared value depending on the ways in which the tool is used and

dependant on the following examples and other variations on how the tool is used:

•

How the tool is used and the materials being ground or cut.

•

The tool being in good condition and well maintained.

•

The use of the correct accessory for the tool and ensuring it is sharp and in good

condition. The tightness of the

grip on the handles.

•

And the tool is being used as intended by its design and these instructions.

This tool may cause hand-arm vibration syndrome if its use is not adequately

managed. This tool should not be used for extended periods of time.

WARNING! Identify safety measures to protect the operator that are based on an

estimation of exposure in the actual conditions of use (taking account of all parts of the

operating cycle such as the times when the tool is switched off and when it is running idle in

addition to the trigger time). Note: The use of other tools may reduce or increase the user’s

total working period on this tool. Using another tool with a similar vibration emission would

be equivalent to working for a longer period with this tool, while working with a machine with

no vibration emission might be equivalent to taking a break.

Helping to minimise your vibration exposure risk

Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).

Avoid using tools in temperatures of 10°C or less.

Plan your work schedule to spread any high vibration tool use across a number of days, or at least

allow for breaks, or time spent using other tools that do not vibrate.

Health Surveillance

All employees should be part of an employer’s health surveillance scheme to help identity any

vibration related diseases at an early stage, prevent disease progression and help employees

stay in work.

26/02/2013 v1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra S32E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info