Bedienungsanleitung Cobra SPX 5400 (Seite 10 von 15) (Englisch)

586753

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Settings and Detection

Your Detector

Nothing Comes Close to a Cobra

Settings

Your Detector

English

Detection

The tables on the following pages show you the types of Signals your detector

will detect, as well as the voice and visual alerts it provides for each of them.

In Voice Alert mode you will first hear several tones, then a voice message

announcing the type of signal detected, followed by more tones. In Tone Alert

mode, you will hear the tones only.

In both Voice Alert and Tone Alert modes, a distinctly different alert tone is

used for each type of signal detected (including separate tones for each laser

signal). For X, K, Ka and Ku band radar signals, the tones will repeat faster as

you approach the signal source. The repeat rate of the tones gives you useful

information about the signal detected. (See responding to alerts on page 18.)

An indication of the type of signal detected will appear in the UltraBright

data Display. During X, K, Ka and Ku alerts, a number will also appear,

indicating the strength of the signal detected. (1 = weakest, 5 = strongest)

X Signal Detected

X K Ka V S 2

X K Ka V S 3 X K Ka V S 5 X K Ka V S 4

K Signal Detected Ka Signal Detected

Ku Signal Detected

To Turn Pop Alert On and Off

While no signal is

being detected,

press and hold both

the Dim and City

buttons for four

seconds.

Tone Voice

Visual Display

Pop On = Two beeps

Pop On

P will blink twice

in the display

Pop Off

P will blink once

in the display

Pop Off = One beep

Radar Alert Settings

The detector allows you to choose whether it will show alerts on the X, K

and Ku bands. The factory settings are: X Band and K Band On; Ku Band Off.

To Turn K Band On and Off

While no signal is

being detected,

press and hold both

the Mute and City

buttons for four

seconds.

Tone Voice

Visual Display

K On = Two beeps

K On

K will blink twice

in the display

To Turn Ku Band* On and Off

While no signal is

being detected,

press and hold the

City button for four

seconds.

Tone Voice

Visual Display

Ku On = Two beeps Ku On

X and K will blink

twice in the display

K will blink once

in the display

K Off = One beep

K Off

Ku Off

X and K will blink

once in the display

Ku Off = One beep

To Turn X Band On and Off

While no signal

is being detected,

press and hold both

the Dim and Mute

buttons for four

seconds.

Tone Voice

Visual Display

X On = Two beeps

X On

X will blink twice

in the display

X Off

X will blink once

in the display

X Off = One beep

Pop Alert

The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature

of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses

a single, short-time pulse to measure the target vehicle’s speed.

The Pop mode receiver senses Pop singles beyond the effective range of

Pop radar guns. As the Pop mode receiver is so sensitive, you should limit

the use of Pop Detect mode to highway and rural driving.

Pop Alert will alert you to Pop radar signals. During the alert, the unit

continues to detect other signals. The factory setting is Pop Detect Off.

Pop Alert (continued)

SPX5400_MANL.indd 14-15 1/7/13 10:50 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra SPX 5400 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info