Bedienungsanleitung CombiSteel 7227.0005 (Seite 14 von 88) (Deutsch, Englisch, Holländisch, Französisch)

778171

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

www.combisteel.com

Range hood operations

Control Panel Layout and Buttons Configurations:

In addition to the remote control feature, this range hood is also equipped with a heat sensor that will self-

calibrate in 5 seconds when the range hood is first electrically activated and beeps when self-calibration is done.

To conserve energy, the LCD panel will turn off automatically after 5 seconds of inactivity.

Adjusting Heat Sensitive Auto Speed (HSAS) Function:

• Press Auto Function button to Turn On/Off the Auto Mode. The Auto Function Icon will appear in the

LCD Panel when Auto Mode is On.

• While the range hood is off, press and hold Auto Function button to enter the temperature setting mode.

Press Increase or Decrease button to adjust the comparison temperature value between the internal

and external heat sensors from 7°F to 20°F. The temperature setting mode will exit automatically after

5 seconds of inactivity.

• While the range hood is off and Auto Function is activated, the blower will turn on to its highest speed

automatically when the internal temperature is 4 times above the external temperature. Then it will

adjust the speed level (between speed levels F4 to F1) automatically according to the detected

temperature between the sensors (4 times to 1 time). The speed level can also be manually overwritten

by press the Increase or Decrease button and Auto Function will reactivate after 2 minutes. The blower

can ONLY be turned off MANUALLY or activate the delay off timer function.

Activating Normal Blower Function:

• While the range hood is off, press Increase or Decrease button to start the blower. Press Increase button

to increase blower speed (F1 to F4) as indicated in LCD panel. The Increase button cycles blower settings

from off (00), quiet speed (F1), low speed (F2), medium speed (F3) to high speed (F4).

• While the range hood is on and the blower is running, press Decrease button to decrease blower speed

(F4 to F1) as indicated in LCD panel. The Decrease button cycle blower settings from high speed (F4), to

medium speed (F3), low speed (F2), quiet speed (F1) to off (00).

Activating Light Function:

• Press Light button once to turn on the lights, and once again to turn off the lights.

CAUTION: DO NOT touch the lights until switched OFF and cooled.

Activating Power-Off Delay Function:

• While the range hood is on and the blower is running, press Power-Off Delay button to activate delay

off timer and “Power-Off Delay” icon will appear in LCD panel. Adjust to desired period of delay off timer

by pressing Increase or Decrease button (minimum 1 minute to maximum 15 minutes). Timer begins to

countdown immediately, when it reaches 0, the blower will shut off.

Adjusting Clock Function:

• While the range hood is off, press Power-off Delay button once to enter the clock setting mode, press

Increase or Decrease button to set the Hour. Press the Power-off Delay button again to set the Min.

Press the Power-off Delay button again to exit the clock setting mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

CombiSteel 7227.0005 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info