Bedienungsanleitung Comelit 8461MB (Seite 26 von 42) (Englisch)

636221

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

f To send the call from an external unit, touch the button corresponding to the user you want to contact.

If the system is not busy: on the external unit the caller illumination LED will light up, the

LED will ﬂash and the

conﬁrmation tone will sound. The video image from the external unit will appear automatically on the main internal

monitor/s. The video image can be displayed on secondary monitors (without answering the call) by pressing button 2

(programmed by default for the self-ignition function).

» If the user responds to the call: the LED

will illuminate on the external unit.

» If the user presses the lock-release control: the LED

will illuminate on the external unit.

If the system is busy: the led

will ﬂash and the external unit will emit the system busy tone.

When a call is made from the external unit, the monitor switched on will be the main door entry monitor.

Any other secondary monitors in the same family unit will remain o.

When responding to a call from the external unit using a secondary door entry monitor, the image is automatically displayed on

the monitor (and the main door entry monitor is switched o).

To display the image without activating audio communication with the external unit, press button 2 -self-ignition/video request.

√ Self-ignition is possible only when the system is in standby

f Press the self-ignition button (button 2 by default) to display on the monitor the image transmitted from the external unit.

GENERAL INTERNAL CALL

SELECTIVE INTERCOM

MAIN/SECONDARY MONITORS

General intercom: function allowing calls to one or more internal units identiﬁed by the same call address as used by the

external unit.

f Press the programmed button to send the call

If the system is not busy: the receiver of the call can lift the handset (or press the audio button) to enter into

communication with the caller. The communication is terminated by replacing the handset (or by pressing the audio button

again).

If the system is busy: the LED indicator light will ﬂash for a few seconds (on Mini monitors the privacy LED will ﬂash 4

times).

A call from the external unit always takes priority over an intercom communication. In this case, users who are already

speaking will hear a tone similar to the ringtone, if the call is addressed to them, or otherwise a triple signalling tone will sound

and the video image from the external unit from which the call was made will appear (in the case of a main monitor).

f To terminate the call in progress and enter into communication with the external unit, hang up and then lift the handset

again (or press the audio button 2 times).

Consult page 11 onwards for programming information.

• External unit (Porter) with switching (secondary): default function to be used also in systems with switching device Art.

1404 (for installations with 3 or more entrances) (see diagrams MNK/017QC, MNK/017CQC).

• Secondary external unit (Porter): function to be used in systems with switching device Art. 1405 and 2 external units (see

diagram MNK/017AQC).

• Main external unit (Porter): function to be used in systems with switching device Art. 1405 and 2 external units (see

diagram MNK/017AQC).

Selective intercom: function allowing calls to one or more internal units identiﬁed by a dedicated call address (see table B,

page 19), which is dierent to the call address used for external unit calls.

The KIT can manage up to a maximum of 4 door entry monitors or door-entry phones for each call button, including a

maximum of 1 main door entry monitor.

Operation

To make a call from an external unit

Self-ignition

Operation with additional internal units

Operation with additional external units

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Comelit 8461MB Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info