Bedienungsanleitung Concept OV5220 (Seite 24 von 59) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

804585

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

46 47

ENEN

OV5220 OV5220

PRODUCT DESCRIPTION

1 Control panel with display

2 Air outlet

3 Dust lter

4 Water lter

5 Freeze pack

6 Water tank

7 Remote control

DESCRIPTION OF THE CONTROL PANEL

A Cooling mode button

B Oscillation button

C Timer button

D ON/OFF button

E Mode setting button

F Airow speed setting button

G Ionization function button

AB. C I D N E F G

J K L

H M

Note: Functions on the control buttons of the control panel correspond to the functions of the buttons on the remote

control.

H Cooling mode indicator

I Oscillation indicator

J High airow speed indicator

K Medium airow speed indicator

L Low airow speed indicator

M Sleep mode indicator

N Natural breeze mode indicator

OPERATING INSTRUCTIONS

Connect the power cord to the mains. The appliance is in standby mode.

ON/OFF button (D)

Press the ON/OFF button to switch o the appliance. After switched on, the appliance starts at low airow speed.

Airow speed setting button (F)

Press this button to change the airow speed in 3 levels (the corresponding indicator always lights up on the display).

Mode setting button (E)

Press this button to choose from 3 saved modes:

1. Basic: no indication on the display. It is necessary to set the airow level manually (this mode is set after starting

the appliance).

2. Sleep: the icon (M) is displayed.

3. Natural breeze: the icon (N) is displayed.

Timer button (C)

Use the timer button to set the required operating time from 0 to 7.5 hours in 0.5-hour intervals.

Ionization function button (G)

Press this button to switch on/o the ionization function.

Oscillation button (B)

Press this button to switch on/o the oscillation function.

Cooling mode button (A)

Press this button to switch on/o the air cooling function.

Note: Always pour water into the water tank before starting the cooling mode!

Filling the water tank with water

Always switch o the appliance and unplug it from the mains before lling or emptying the water tank.

• Release the lock of the water tank on the back side of the appliance.

• Remove the water tank from the appliance. (In order to completely remove it, you need to release the pump

locks inside the tank and remove the pump. Make sure that the pump is installed in its original position before

reinstalling the tank.)

• Fill the water tank with water (we recommend using demineralized water to ensure maximum lifetime of the

appliance).

• Make sure that the water level is between the MIN and MAX lines.

• Adding ice cubes or freeze packs into the water in the water tank make the air cooling function more ecient (the

freeze packs can be re-frozen and reused).

• Make sure that the water level does not fall below the MIN line (applies only in active cooling mode).

• We recommend changing the water at least once a week.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Concept OV5220 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info