Bedienungsanleitung Concept VP5153 (Seite 25 von 59) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

802916

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

48 49

ENEN

VP5150 | VP5151 | VP5152 | VP5153 VP5150 | VP5151 | VP5152 | VP5153

CLEANING AND MAINTENANCE

Accessories and vacuum cleaner can be cleaned with a damp cloth.

Do not immerse the power cord, plug or appliance in water or any other liquid.

Do not use aggressive substances such as solvents or abrasives for cleaning!

TROUBLESHOOTING

Problem Cause Remedy

The motor is not working

The plug inserted incorrectly or

insuﬃciently in the wall outlet. Check connection of the plug.

The wall outlet is not energized. Check the presence of voltage, e.g.

with another appliance.

The motor stopped working Poor or too low airﬂow, thermal

motor protection has tripped.

Unplug the power cord. Check

and clear the intake and exhaust

air passage, ﬁlter cleanliness, and if

necessary, replace the dust bag. Allow

the vacuum cleaner to cool down.

Reduction of suction power

Full or clogged dust container. Empty and clean the dust container.

The ﬁlters are clogged. Clean or replace the ﬁlters.

Clogged nozzle, tubes or hose. Check and clear the intake and

exhaust air passage.

The vacuum cleaner is warming up Warming up of the vacuum cleaner during operation is normal, it is not

amalfunction.

CHECKING THE FULLNESS OF DUST CONTAINER

If the suction power of the vacuum cleaner decreases even when the ﬂoor nozzle is raised above the ﬂoor, empty the

dust container immediately.

Warning: if the suction power is low even after the dust container is emptied, there may be several reasons:

- Some of the air passages (hose, telescopic tube, suction opening, ﬂoor nozzle or other attachments) are blocked.

- The air inlet ﬁlter in the dust container is dirty or old. It must be cleaned or replaced with a new one.

- The air outlet ﬁlter is dirty or old. It must be cleaned or replaced with a new one.

Check each of these options and ﬁx the problem before using the appliance again. If you are unable to identify the cause

of the problem, take the appliance to your nearest service centre. Never use the appliance if the suction power is low, as

this could irreparably damage the motor.

MAINTENANCE

It is recommended to empty the dust container and clean the vacuum cleaner ﬁlters after each use of the vacuum

cleaner.

EMPTYING THE DUST CONTAINER

1. Unplug the vacuum cleaner, pull the hose out of the suction opening.

2. Press the latch on the vacuum cleaner body (Fig. 2) and remove the dust container

upwards.

3. Press the empty button (Fig. 3) and empty the dust into the waste bin.

4. After closing the container, place it back into the vacuum cleaner. Make sure the

container is positioned properly. You must hear the click of the handle latches.

REPLACEMENT AND CLEANING OF FILTERS

• The ﬁlters should be cleaned or replaced with visible soiling or when the suction

power of the vacuum cleaner drops. Check them after each use of the vacuum

cleaner.

• To avoid damaging the vacuum cleaner, do not use it without properly ﬁtted ﬁlters.

• Unplug the vacuum cleaner before replacing the ﬁlters.

• You can purchase suitable ﬁlter types from your dealer or order from the

manufacturer.

1. Remove the dust container from the vacuum cleaner.

2. Turn the dust container cover counterclockwise and remove it.

3. Turn the ﬁlter with SMS fabric counterclockwise and remove it.

4. Remove the foam ﬁlter.

5. The ﬁlters can be cleaned by tapping. If heavily soiled, they can be washed in

lukewarm water and left to dry properly.

CHECKING AND REPLACEMENT OF THE AIR OUTLET FILTER

1. Turn the left wheel cover counterclockwise and remove it (Fig. 4).

2. Remove the ﬁlter.

3. The ﬁlter can be cleaned by tapping. If heavily soiled, it can be washed in lukewarm

water and left to dry properly.

4. Insert a clean or new air outlet ﬁlter and close the air outlet grille.

Fig. 3

Fig. 4

Fig. 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Concept VP5153 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info