Bedienungsanleitung Concept VR3110 (Seite 45 von 99) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

802864

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

88 89

ENEN

VR3100 | VR3110 | VR3120 VR3100 | VR3110 | VR3120

Error 18: Error encountered initiating shut-down The robot alerts the user and automatically shuts down

or recharges.

Error 19: Low battery, please recharge When the battery charge level is too low, the robot is not

in the docking station and cleaning starts (the battery

charge level is less than 10 %).

Error 20: To shut me down, please place me away from

the docking station

The robot was turned oﬀ while charging at the docking

station.

WIRELESS CONNECTION AND COMPATIBILITY

• Jindřich Valenta - CONCEPT shall in no way be liable for any incidental, indirect or consequential damages, or for any

loss of data or loss due to information leakage during communication via wireless technology.

• Successful wireless communication cannot be 100% guaranteed on all Smart devices and Wi-Fi networks (routers).

Due to the variety of devices on the market, there may be cases where the character or speciﬁcation of a given

Smart device or Wi-Fi network (router) makes connection impossible or is somehow disturbed. In addition, a number

of factors, including hardware and software conﬁguration, also aﬀect the success of wireless communication via

Wi-Fi network. The connection between the robot and your Wi-Fi network can also be adversely aﬀected by the

surrounding Wi-Fi networks, which can be tuned to the same channel and thus interfere with the connection (e.g. in

housing estates, apartment buildings, etc.). These facts are not a reason to claim the appliance.

• The application is owned and operated by a third party (the “Entity”) diﬀerent from Jindřich Valenta - CONCEPT (the

“Seller”). No personal data is transferred to the Entity by the Seller. When registering for the application, the customer

submits personal data directly to the Entity, who becomes the administrator of personal data. The application and the

associated protection of personal data are governed by the Entity’s rules.

Compatibility:

Smart device operating system - Android 5.0 and higher

- IOS 9.0 and higher

Wi-Fi network - 2.4 GHz

- WPA1 and WPA2 security (WPA2 recommended)

NOTICE: The appliance cannot be operated on IEEE 802.1X-protected Wi-Fi networks (usually corporate Wi-Fi networks).

OPERATING USING THE APP

Before you can control the device through the application, it is necessary to connect it to your phone and give it access

to your Wi-Fi network.

Recommended distance during set-up: less than 4 meters

Make sure your robotic vacuum cleaner, router, and your mobile phone are close together so that you can pair your phone

with the device with no problems.

Download and installation of the app

1. Download the “Concept Robot” app to your smart device for free. You can ﬁnd it in the Apple Store or Google Play

database (Fig. 1).

2. Open the “Concept Robot” app on your smart device. Follow the instructions to create an account. You can use your

email to register your account. The application may require you (depending on smart device model and operating

system) to allow diﬀerent accesses (e.g. access to storage, device location, etc.). For proper function, it is necessary

to enable these accesses. Otherwise, you may prevent the application from functioning properly or prevent it from

pairing (Fig. 2).

3. Log in to the application under your created account (Fig. 3).

Fig. 1 Fig. 2 Fig. 3 Fig. 5Fig. 4

Instructions for pairing the device

Note: Pair the vacuum cleaner with a charged battery or directly placed in the charging station.

1. At the beginning of pairing, you need to be connected to your Wi-Fi network.

2. Then press + (Fig. 4) in the application to add a new device.

3. Make sure that the appliance is in standby mode before starting the connection. Press both buttons (Fig. 5) at the

same time for at least 3 seconds until the robot starts ﬂashing and you hear the “Wi-Fi lost, please follow the App

instruction for reconnection” voice message. Make sure your phone is connected to the same Wi-Fi network you want

to connect the robot to.

4. At this point, the vacuum cleaner will start sending its own signal. Keep your smart device close to the vacuum

cleaner and wait until the vacuum cleaner appears on the display. Click “Next” (Fig. 6).

5. Fill in the Wi-Fi network name and password (the same Wi-Fi network to which your smart device is connected).

6. Now the name of the network (hotspot) transmitted by the vacuum cleaner appears in the list of visible Wi-Fi networks

of your smart device. Select "Robot ..." and connect to it (Fig. 7). At this point, your smart device may alert you to the

possibility of unavailability of the Internet, but ignore this. Then click "<" (top left) to return to the application and

wait for the connection (Fig. 8 and 9).

7. Once the device is connected, the main screen will appear showing the device status (Fig. 10). You can now operate

the vacuum cleaner remotely (e.g. from work). For this function, however, you must always have the Wi-Fi network to

which the vacuum cleaner is paired activated.

Fig. 6 Fig. 7 Fig. 8 Fig. 10Fig. 9

Concept VR3110 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info