Bedienungsanleitung Concept VR3120 (Seite 43 von 99) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

802865

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

84 85

ENEN

VR3100 | VR3110 | VR3120 VR3100 | VR3110 | VR3120

TIME SETTING

1. Press the button on the remote control to enter the

time setting, the Sunday symbol ﬂashes on the LCD.

2. Press the left and right buttons to select the day of the

week and press the button to conﬁrm it, then the

LCD will automatically switch to the clock setting.

3. Press the up and down buttons to set the hour and

press the left and right buttons to move to the minute

setting.

4. After setting the current time, point the remote control

at the front of the robotic vacuum cleaner and press

the button to conﬁrm all time settings. Failure to

do so will invalidate your settings.

5. This completes the time setting for both the remote

control and the robotic vacuum cleaner.

Cleaning plan

1. Press the button on the remote control to enter

the plan setting function, the Sunday symbol ﬂashes

on the LCD.

2. Press the left and right buttons to select the day of the

week and press the button to conﬁrm it, then the

LCD will automatically switch to the clock setting.

3. Press the up and down buttons to set the hour and press

the left and right buttons to move to the minute setting.

Then point the remote control at the front of the robot

vacuum cleaner and press the button to conﬁrm

this plan setting for the robotic vacuum cleaner.

4. When one plan setting is completed, the remote

control automatically moves to the next plan setting.

If you do not want to continue with the setting, press

the exit button or wait 10 seconds for the setting

to ﬁnish automatically.

5. This completes the time setting for both the remote

control and the robotic vacuum cleaner.

Cancelling the cleaning plan

1. Press the button on the remote control, the

Sunday symbol ﬂashes on the LCD and the symbols

for the days of the week you have planned appear.

2. Press the left and right buttons to select the day of the

week you have planned, and press and hold the button

for 3 seconds to cancel the plan. You can also select

the next planned day you want to cancel, or press the

exit button or wait 10 seconds for the setting to

ﬁnish automatically.

DAILY MAINTENANCE

Main brush (clean regularly)

1. Turn the appliance over and press the latch on the

main brush cover to pull it out.

2. Remove dust from inside and from inside the main

brush with a small brush and clean the main brush.

3. Reassemble the main brush and press ﬁrmly on the

cover until the latch clicks into place.

Latch

The main

brush

Side brush (clean regularly)

1. Turn the appliance over and pull the side brush up.

2. Remove hair and dirt and reﬁt the side brush.

3. Make sure the left side brush (L) and right side brush

(R) correspond to the L and R symbols on the bottom

cover. Push the L and R side brushes to reinstall them.

Note: Replace the side brushes every 3 to 6 months to

ensure their cleaning eﬀect.

R - right side

brush

L - left side

brush

Dust container and ﬁlter grid (clean regularly)

1. Press the button and pull the dust container

backwards.

2. Open and clean the dust container.

Cleaning the ﬁlter grid (clean regularly)

1. After prolonged use, remove the ﬁlter grid, foam ﬁlter

and HEPA ﬁlter.

2. Clean the removed ﬁlter grid. Rinse the foam ﬁlter and

HEPA ﬁlter under water.

3. Wipe the individual parts and let them dry freely.

4. After drying, gradually install them in the correct order:

grid - foam ﬁlter - HEPA ﬁlter.

Filter grid

(coarse ﬁlter)

Button

Filter cover

Foam ﬁlter

HEPA ﬁlter

Note:

• Rinse the ﬁlter grid with clean water and do not add

any detergent.

• Do not clean the ﬁlter grid with a brush or ﬁngers.

• Allow the ﬁlter grid to air dry for at least 24 hours.

• Replace the ﬁlter grid every 3 to 6 months.

Cleaning the ﬁlter (clean regularly)

Dust

container

HEPA ﬁlter

Foam ﬁlter

Filter grid

(coarse ﬁlter)

Water tank

Electrically operated water tank

Wiping module (clean after each use)

1. Remove the cloth, empty the water tank.

2. Clean the cloth, dry both the water tank and the cloth.

For model VR3120, ﬁrst pull out the dust container and

then empty the water tank.

Sensors (clean regularly)

Clean the sensors with a soft cloth as follows:

1. Clean the sensors along the wall to the right.

2. Three cliﬀ sensors at the bottom of the appliance.

3. Infra-red anti-collision sensor in front of the appliance.

4. Protection against electric shock and docking station

contacts at the bottom of the appliances (turn oﬀ the

appliance during cleaning).

5. Docking station signal transmission area.

Cliﬀ sensor

TOF sensor

Charging

contact

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Concept VR3120 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info