HTTP server access:
This field allows the user to configure the Web pages can be accessed from.
ALL:
When this field is checked, it allows both WAN and LAN access to the Web pages.
Restricted LAN:
This field allows the Web pages access from LAN side.
Restricted WAN Specified IP & Subnet Mask: This field allows the Web access from
WAN side with a specify IP and Subnet Mask.
HTTP server port:
This field allows the user to specify the port of the Web access.
FTP server:
This field allows the user to Enable or Disable the FTP connection. If you want FTP
access from the WAN side you must ensure there are no port forwards for port 21.
TFTP server:
This field allows the user to Enable or Disable the TFTP connection.
DMZ:
A DMZ (De-Militarized Zone) is added between a protected network and an external
network, in order to provide an additional layer of security. When there is a suspected
packet coming from WAN, the firewall will forward this packet to the DMZ host.
DMZ Host IP:
The IP address of the DMZ host at LAN side.
DHCP Relay:
If it is enabled, the DHCP requests from local PCs will forward to the DHCP server runs
on the WAN side of a network. To have this function working properly, please disable
the NAT to run on router mode only, disable the DHCP server on the LAN port, and
make sure the routing table has the correct routing entry.
DHCP Target IP:
The DHCP server runs on WAN side.
IGMP Proxy:
Here is the global setting for IGMP Proxy. If it is enabled, then the enabled IGMP Proxy
on WAN PVCs will be working. Otherwise, no WAN PVC can have IGMP Proxy working on
it.
PPP connect on WAN access:
If it is enabled, the PPP session will be automatically established when there is packet
wants to go out the WAN.
PPP Half Bridge:
When the PPP Half Bridge is enabled, only one PC is able to access the Internet and
the DHCP server will duplicate the WAN IP address from the ISP to the local client PC.
Only the PC with the WAN IP address can access the Internet. This function should only
be used if one computer will be allowed to connect to the internet (E.G a Software
firewall computer or Proxy server).
Note:
Click the Submit button to save the settings in temporary memory. If you make
changes the configurations.
