498045
20
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
19
ENU
TROUBLESHOOTING
TROUBLESHOOTING
If any problems arise with the Concord 1500, refer to this troubleshooting chart:
Symptom Possible cause Solution
The camera doesn’t
turn on.
The battery is drained.
Change or recharge the battery. Also, check for
correct polarity (orientation) of the batteries.
Power button must be pressed
for 3 to four seconds
Press and hold the Power button until “ON”
appears in the status display
The camera won’t
capture a image. Is the camera turned on?
The camera powers off automatically after 60
seconds. Make sure the camera’s power is ON
before taking an image.
Is the camera connected to a
computer?
The camera’s buttons are not functional when
connected to a PC. Disconnect the camera to
capture more images.
The light condition is
insufficient.
Turn the flash mode to Flash ON.
The camera is processing.
Wait for the camera to store files. The image
number blinks at status LCD while the camera is
processing and stops blinking when the camera
is ready for use.
Can’t download
images to the PC.
Connection may have failed,
and make sure that “ PC” is
displayed on the LCD of the
camera.
Check to ensure that all connections are secure.
Look for Removable Disk under My Computer.
Can’t play back the
video clips on the
computer under
Windows 98SE or
Windows 2000.
The software of Ulead Photo
Explorer SE Basic from
the supplied CD-ROM has
not been installed on your
computer.
Install Ulead Photo Explorer SE Basic from the
supplied CD-ROM, and restart your computer
after installing it.
Can’t play PC Cam
on the computer.
The camera driver from
the supplied CD-ROM has
not been installed on your
computer.
Install the camera driver from the supplied CD-
ROM.
Make sure “ PCC” is displayed
on the LCD of the camera.
Press the
button until “ PCC” is displayed
on the LCD of the camera.
I get a blurred
image when
downloading my
images to my
computer.
There may be a momentary
delay between pressing the
shutter button and the actual
exposure.
Hold your camera steady until you hear a “beep”
which indicates the exposure is completed.
1500 UG-ENU (516167-00).indd 191500 UG-ENU (516167-00).indd 19 10/22/04 2:46:13 PM10/22/04 2:46:13 PM
Downloaded from www.Manualslib.com manuals search engine
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Concord 1500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info