Bedienungsanleitung Concord ABSORBER XT (Seite 6 von 16) (Englisch)

498048

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Push the seat tilt control (07) upwards.

Press and hold the control (07) and

move the seat part of the CONCORD

ABSORBER into its forward-most

position.

The car seat must be secured with the

lap and diagonal seat belt, even if no

child is traveling in it!

Fold the support leg (11) at the bottom of the

CONCORD ABSORBER forward.

Set down the CONCORD ABSORBER in drive

direction onto the seat or the seat bench.

The CONCORD ABSORBER should align with the

seat and backrest with as much direct contact

as possible. In vehicles with serial headrests, a

readjustment of the headrest or its removal will allow

for a better mounting position of the car seat.

Please remember to readjust or replace the headrest

in the correct position if an adult will be sitting in that

seat instead.

_ MOUNTING THE CONCORD ABSORBER WITH

THE THREE-POINT SAFETY BELT

With the safety of your child in mind, you have decided to purchase our car

seat CONCORD ABSORBER. The product is manufactured under strict

quality control conditions. It will only be fully effective in terms of its safety

features if used according to specifications. Please ensure strict adherence

with the mounting and usage instructions.

The fabric cover is an important component and adds to the effectiveness

of the seat; the seat may therefore only be used with an original CONCORD

cover!

The child seat can be used on any vehicle seats that are equipped with a lap

and diagonal seat belt. For reasons of results of accident statistics, however,

we recommend using the seat behind the front passenger seat.

• Thisproductisa‚semiuniversal‘childrestraintsystem.Ithasbeen

approved in accordance with the ECE regulation 44, change series 04

for general use in vehicles, and will fit most but not all car seats.

• ThischildrestraintsystemofECEGroupIissuitableforchildrenbetween

the ages of 9 months and 4 years with a body weight between

9 and 18 kg.

• ThischildsafetyrestraintiscompliantwiththeISOFIXsizecategory:A.

• Properfitofthecarseatcanbeassumedifthevehiclemanufacturer

 declaresthevehiclesuitableforthemountingofa‚semiuniversal‘child

safety restraint for the relevant age group in his vehicle manual.

• Thischildsafetyrestraintwasapprovedinaccordancewiththestricter

 requirementsoftheclass‚semiuniversal‘thanpreviousmodels,whichdo

not bear this label.

• Ifyouhaveanyquestionsordoubts,pleasecontactthemanufacturerof

the child safety restraint or your retailer.

• Onlysuitableforuseinvehicleswithlapanddiagonalseatbelt,whichare

approved in accordance with ECE regulation 16 or similar standard.

_ USING THE CONCORD ABSORBER

_ GENERAL INFORMATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Concord ABSORBER XT Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Concord ABSORBER XT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info