Bedienungsanleitung Condair RS (Seite 10 von 80) (Englisch)

652338

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

10 Product Overview

3.2 Functional description

The Condair RS steam humidier is an atmospheric steam generator. It operates on the resistance heating

principle and is designed for direct room air humidication (with blower pack) and indirect humidication

(with steam distributor) in venti lating and air-conditioning systems.

Water supply

The water is supplied via a lter valve (accessory "Z261") to the steam humidier. It reaches the steam

cylinder via the level controlled inlet valve and the open lling cup.

Note: the open lling cup is designed in such a way, that the supply water is separated from the unit

water. That means, that no unit water can ow back into the supply water line.

Level regulation

The water level in the steam cylinder is continuously monitored with the level unit. If the water level

reaches a preset level (due to the evaporation process) the level unit supplies a signal to the controller.

This opens the inlet valve and the steam cylinder is lled up. When the preset operating level is reached,

the level unit supplies another signal to the controller to close the inlet valve.

The pressure equalizing pipe between the steam connection and the level unit ensures that the water

levels are the same in the steam cylinder and the level unit.

Steam generation regulation

The steam is produced in the steam cylinder by several resistance heating elements. An external or the

integrated continuous controller control the steam production fully variably from 0 to 100 %.

Alternatively the Condair RS can be controlled also via an On/Off controller.

Flushing

The evaporation process increases the concentration of minerals in the water of the steam cylinder. A

suitable volume of water must be ushed out of the steam cylinder from time to time and replaced by

fresh water to ensure that this concentration does not exceed a specic value unsuitable for operation.

The Condair RS consists of the following two forms of ushing:

– Automaticushingtakes place as soon as the water in the steam cylinder exceeds the upper

operating level (e.g. by foaming of the water).

– Flushing dependent on time performs the ushing process at preselected time intervals.

Automatic or time-dependent ushing takes place depending on the water quality and the operating data.

If the lowest operating level is reached during the ushing process, the inlet valve remains open until

the water level in the steam cylinder has reached the normal working level again. If the lowest operating

level is not reached, the inlet valve is closed.

Scale collector tank

The minerals precipitated by the evaporation process sink down in the steam cylinder and accumulate

in the scale collector tank, thus extending the service intervals and reducing the maintenance work.

Units designed for operation with water from a RO system or with de-ionized water do not require a scale

collector tank as RO water and de-ionized water contains only small amounts of minerals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Condair RS Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Condair RS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info