652338
49
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
49Operating the control software
5.6.2 Switching on/off password protection and software updates function -
submenu "Administrator"
In the "Administrator" submenu you can activate and deactivate the password protection for the main
menu and the setpoint, and download software updates via a USB stick connected to the USB connector.
Password settings Tab
Setpoint Password: with the function "Setpoint Password" you can
protect the setpoint input screen with the user password "8808" against
unauthorised access ("Yes") or not ("no").
Main Menu Password: with the function "Main Menu Password" you
can protect the access to the main menu with the user password "8808"
against unauthorised access ("Yes") or not ("no")
Software Update: with the function "Software Update" you can update
the control software of the integrated controller. See information in chapter
6.8.
Driver A.DB.A Update: with the function "Ext.A.DB.A Update" you can
update the driver board software of steam humidier A.See information
in chapter 6.8.
Driver B.DB.A Update: with the function "Ext.A.DB.A Update" you can
update the driver board software of steam humidier B.See information
in chapter 6.8.
Driver C.DB.A Update: with the function "Driver C.DB.A Update" you can
update the software of the optional reverse osmosis control board. See
information in chapter 6.8.
Note: this menu item appears only, if the Condair RS is connected to a
Condair RO-A reverse osmosis system and if the reverse osmosis system
was activated in the factory menu.
Load Contact Info Page: this function allows you to upload new contact
information data (which are displayed when pressing the <Help> button)
from a USB memory stick connected to the USB port on the control board.
Manually Load Contact Info: this function allows you to manually change/
enter contact information data (which are displayed when pressing the
<Help> button).
LoadLoggerDenition: this function allows logging of system parameters
with a FAT32 formatted USB memory stick connected to the USB port
on the control board. A factory supplied access le is required to enable
operation.
Software Settings Tab
49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Condair RS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Condair RS

Condair RS Installationsanweisung - Englisch - 80 seiten

Condair RS Bedienungsanleitung - Holländisch - 80 seiten

Condair RS Installationsanweisung - Holländisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info