Bedienungsanleitung Constructa CA328352 (Seite 34 von 52) (Deutsch, Englisch, Holländisch, Französisch)

596520

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Rectifying faults

Faults often have simple explanations. Please read the notes in

the table before calling the aftersales service.

The electronics of your hob are underneath the control panel.

For various reasons, the temperature in this area may rise

sharply.

In order that the electronics do not overheat, the hotplates are

switched off as and when necessary. The ”ƒ, ”…, or ”† display

appears alternately with the • or œ residual heat indicator.

After-sales service

Our after-sales service is there for you if your appliance should

need to be repaired. We are committed fo find the best solution

also in order to avoid an unnecessary call-out.

E number and FD number:

Please quote the E number (product number) and the FD

number (production number) of your appliance when

contacting the after-sales service. The rating plate bearing

these numbers can be found on the appliance certificate.

Please note that a visit from an after-sales service engineer is

not free of charge, even during the warranty period.

Please find the contact data of all countries in the enclosed

customer service list..

Trust the expertise of the manufacturer, and rest assured that

the repair will be carried out by trained service technicians

using original spare parts for your domestic appliance.

Display Fault Measure

Blank There is no power supply. Check the household fuse for the appliance. Check whether

there is a power cut by trying other electronic appliances.

All displays flash The touch controls are wet or an object is

resting on them. Dry the touch controls or remove the object.

”ƒ Several hotplates have been used over a

prolonged period at high power settings.

To protect the electronics, the hotplate

has been switched off.

Wait a while. Touch any touch control. When ”ƒ goes out, the

electronics have cooled down sufficiently. You can continue

cooking.

”… Despite the switch-off by ”ƒ, the electron-

ics have become hot again. All hotplates

have therefore been switched off.

Wait a while. Touch any touch control. When ”… goes out, you

can continue cooking.

”† and the heat set-

ting flash alternately.

An audible signal

can be heard

Warning: There is a hot pan in the area of

the control panel. There is a risk that the

electronics will overheat.

Remove the pan. The fault display goes out shortly afterwards.

You can continue cooking.

”† and audible sig-

nal There is a hot pan in the area of the con-

trol panel. To protect the electronics, the

hotplate has been switched off.

Remove the pan. Wait a while. Touch any touch control. When

”† goes out, you can continue cooking.

”‰ The hotplate was in operation for too long

and has switched itself off. You can switch the hotplate back on again immediately.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Constructa CA328352 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info