Bedienungsanleitung Constructa CD11391 (Seite 14 von 32) (Deutsch, Englisch, Holländisch, Französisch)

596543

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Trouble shooting

Malfunctions often have simple explanations. Please read the

following notes before calling the after-sales service.

: Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried

out and damaged power cables replaced by one of our trained

after-sales technicians. If the appliance is defective, unplug the

appliance from the mains or switch off the circuit breaker in the

fuse box. Contact the after-sales service.

Malfunction table

--------

Replacing bulbs

: Risk of electric shock!

When changing the bulbs, the bulb socket contacts are live.

Before changing the bulb, unplug the appliance from the mains

or switch off the circuit breaker in the fuse box.

: Risk of burns!

Halogen bulbs become very hot when switched on. There is still

a risk of burning for some time after they have been switched

off. Allow the halogen bulbs to cool down before replacing

them.

Important Only use a bulb of the same type and same power

(see also the bulb holder or rating plate).

Replacing halogen bulbs with screw base

Notes

■ To replace the bulbs, do not remove the plastic cover. The

bulbs can be accessed from inside by removing the filter

grid.

■ When inserting halogen bulbs, do not touch the glass bulb.

Use a clean cloth to insert the halogen bulbs.

1. Allow the bulb to cool down.

2. Remove the filter grid.

3. Unscrew the bulb and replace it with a bulb of the same type.

4. Fit the filter grid.

5. Insert the mains plug and switch on the fuse again.

Replace the bulb with one of the same type:

Voltage: 230 V

Power: Max. 28 W

Thread: E14

After-sales service

Our after-sales service is there for you if your appliance needs

to be repaired. We will always find the right solution in order to

avoid unnecessary visits from a service technician.

When calling us, please quote the product number (E no.) and

the production number (FD no.) so that we can provide you with

the correct advice. The rating plate with these numbers can be

found inside the appliance (remove the filter grid to gain

access).

You can make a note of the numbers of your appliance and the

telephone number of the after-sales service in the space below

to save time should it be required.

Please be aware that a visit by an after-sales engineer will be

charged if a problem turns out to be the result of operator error,

even during the warranty period.

Please find the contact data of all countries in the enclosed

customer service list.

Rely on the professionalism of the manufacturer. You can

therefore be sure that the repair is carried out by trained service

technicians who carry original spare parts for your appliances.

Problem Possible cause Solution

The appliance

does not work

The plug is not

plugged in.

Connect the appliance to

the electricity supply

Power cut Check whether other

kitchen appliances are

working

Faulty fuse Check in the fuse box to

make sure that the fuse for

the appliance is OK

The lighting

does not work.

The bulbs are

faulty.

For information on chang-

ing the bulbs, see the

"Replacing Bulbs" section.

E no. FD no.

After-sales serviceO

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Constructa CD11391 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info